http://masondixondragway.com/2024%20Mopar%20Meet.pdf
Just saw this, and figured I'd post it now. Lots of lead time.
Rick Covalt, can you check on this? Flyer says slant six class.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Thanks, Charlie!

I just put this on my calendar... Always look forward to this one. I will try to bring something that has not appeared there before, or at least one that has a new configuration.

Lou

_________________
Home of Slant6-powered fun machines since 1988

You all know my situation. However I'm going to plan it like I will be going. The date should give me plenty of time to get things done, and as of today I have Home health care again for my wife. So that takes some load of me. So we will see what happens.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Looks Good to me.

Thanks!


Greg

_________________
http://www.youtube.com/hyperpack

Good luck, Charlie. Would love to see you there if it works out. Glad that you have help at home with Peg again...

Lou

_________________
Home of Slant6-powered fun machines since 1988

Yes we will plan on this. This will be year number 15

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Can we get a race in on the Saturday Test n Tune as well?

I know if you email Elmer now He will get back to you on 5/17/24

Greg

_________________
http://www.youtube.com/hyperpack

I haven't even looked at the schedule and it may be changed in the next 5 months. But we should not have any trouble getting 2 races in.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I know Mandi will be racing...
We always like that race...

_________________

joesnow AKA Dan

Start working on your car now, Dan! Looking forward to seeing you and Mandi out there. Let us know if you need any parts, help, etc...

Lou

_________________
Home of Slant6-powered fun machines since 1988

Thanks Lou...engine is at the machine shop now...figured out where we (me) went wrong...so hopefully a much better showing this year...

_________________

joesnow AKA Dan

Ahh machine shop waiting. The time honored hod rodder tradition..

Best of luck on getting those parts together.

I have some parts at my machine shop too.

See you in the spring.

Greg
.

_________________
http://www.youtube.com/hyperpack

I wish I had a reliable machine shop to use. My old one closed up. Another one I tried said my slant six head was too big to fit in their milling machine (inline chevy head sitting next to the machine). Another one messed up two sets of 198 rods. Third shop said they could salvage the rods. Had them do one set. Came back still unusable.
OH yeah, I had another shop press off a set of stock pistons from 225 rods. Told them to be carefull with the pistons and keep the pins with them as I wanted to save them. Charged me $15 each, and scrapped the pistons and pins.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Steve Adams & son will try to make M-D with one car.
PS: Peg lost her home caregiver AGAIN. Can't say as I blame them. The agencies don't pay much, and where we live most have a 45 minute commute each way. They don't get paid travel time or mileage, and they only are authorized 3 hrs a day.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

_________________
http://www.youtube.com/hyperpack