Ok, so I took some much needed time to re-calibrate my motivation and I'd to try to figure out what wheels I would need to get to make this work with the Pirate Jack kit I already purchased which is the 5x4 small bolt pattern kit.

Here are the specifications that the Pirate Jack kit requires:

Minimum Wheel Size: 14 inches (fits most original 14" rims; does NOT fit Steely Rims, Cragar Steel SST Rims, Year One Rally, or any drum 14" rim that had smaller than 10" drums).

Fit's Most 14" Wheels. The measurement requirement are a minimum 13.25" overall inside diameter with at least a minimum of 4" backspacing. Anything less than that will not allow the calipers to clear the wheel.


I'm not sure what other information other than that if any is needed. I truly do appreciate any and all help.

Looking forward to sorting this out