Hi, I bought a 1973 /6 A body 22" 3-row radiator which I'm getting refreshed for my Cuda, and would like to find a shroud to fit onto.

Shroud bolt pattern on the radiator is about 21-3/4" by 13-1/4"
Related to the center of the core, the fan is offset about 1/2" to the driver side and about 1/4" up.

If you have one which may fit send me an offer including shipping to FL 34239


18" flexfan to illustrate the fan location in the car.

I've tried the shroud off of my Volaré wagon with a 22" radiator but the shroud bolt pattern is 22" by 14-1/4" plus the core is 1" higher so the shroud surround hit the hose nipples of the A body radiator...

_________________

I likely have one give me a few days to check.

Greg

_________________
http://www.youtube.com/hyperpack

Would be great! Thanks in advance.

_________________

Message Sent!

_________________
http://www.youtube.com/hyperpack