I have a 170 short block and a couple 1 barrel iron manifolds + exhaust manifolds that are going to the recycler very soon; It was running when removed. i'm clearing out space in my shop.

I'm willing to tear it the rest of the way down and remove the 170 rods if someone is interested - PM me an offer and shipping.

Anything else needs to be picked up near Atlanta.

I also have a pushbutton 904 (ball and trunnion). I'd call it a rebuildable core - it would move, but i never drove it farther than down the street and back. It could be ready to drive for a while or ready to die at any moment...

Not slant six related, but i also have front end parts from a 1937 Chevy Coupe - steering box, knuckles, drums, leafs etc.

I've had them on and off on Craigslist for months (and I think i posted here a year ago or so, too) with no takers - last chance!

simmons was looking for a PB 904.

i need a 170 but not in ga.

_________________
Hyper_pak

Too bad I didn't know back in August. Drove through there in my 62 and could have picked up the 170. Would be happy to have that, but not worth a special trip.

Lou

_________________
Home of Slant6-powered fun machines since 1988

If you were only about half the distance from me, I would probably take the 170 and PB trans. But Atlanta is more than 1 day round trip.
I hate to see anything go to scrap.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225