Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 2:14 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu May 05, 2005 10:07 am 
Offline
EFI Slant 6
User avatar

Joined: Wed May 28, 2003 9:08 am
Posts: 389
Location: Chelsea, MI
Car Model: 71 Dodge D100 64 Plymouth Valiant Wagon
Sometimes I just don't get it, but I'm hoping somebody can explain. :oops:

I've got a 71 D100 with a 727 transmission. Because I can get a really good deal and I've had a lot of problems with BBD throttle shafts, I'm thinking about picking up an Edelbrock 500cfm 4bbl.

Lokar has a kickdown cable for 727 transmissions. On my transmission, the kickdown is activated by a kickdown rod.

So, how does a cable take the place of a rod? Is there some extra lever to install or something?

Thanks for your learned responses,

Joe

_________________
Joe Hoppe

71 D100 225 Super Six 727 AT on 2008 Crown Vic CopCar frame

64 Valiant Wagon 225 904 AT 3:23 8.75"


Top
   
 Post subject:
PostPosted: Thu May 05, 2005 12:21 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14984
Location: Park Forest, Illinoisy
Car Model: 78 Volare
The cable takes the place of the rod, and has a bracket that mounts at the tailshaft extension. On the kits that I have, I had to make a small bracket for the carb end, but it wasn't complicated and worked very well when done. :shock:

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Thu May 05, 2005 4:17 pm 
Offline
Board Sponsor
User avatar

Joined: Mon Jan 12, 2004 4:20 am
Posts: 2011
Location: Argentina
Car Model:
hey.

I did a custom bracket on the carb lever too.

Image

later I drilled 2 holes above the one you see, so I can get 3 kickdown feels, a short throw one for firmer shifts and moer sensitive kickdown, a middle position and a "town" mild shifting that feels like the stock rod.

_________________
Juan Ignacio Caino

Please use e-mail button istead of PM'ing. I do log in sometimes but I'll be answering quicker thru e-mail.


Top
   
 Post subject:
PostPosted: Fri May 06, 2005 6:12 am 
Offline
EFI Slant 6
User avatar

Joined: Wed May 28, 2003 9:08 am
Posts: 389
Location: Chelsea, MI
Car Model: 71 Dodge D100 64 Plymouth Valiant Wagon
Thanks, 'zilla and Slantsixer.

How does the bracket hook up to the transmission? Do you have the kit number? All I could see was the cable itself.

Thanks again for your expertise,


Joe

_________________
Joe Hoppe

71 D100 225 Super Six 727 AT on 2008 Crown Vic CopCar frame

64 Valiant Wagon 225 904 AT 3:23 8.75"


Top
   
 Post subject:
PostPosted: Fri May 06, 2005 1:32 pm 
Offline
Board Sponsor
User avatar

Joined: Sat Feb 08, 2003 2:37 pm
Posts: 4194
Location: CA
Car Model:
I have the 904 kit in my car... I thought the 727 and 904 are same cables?

On my 904 kit, the transmission bracket is built into the cable itself, its just a small tab of metal that the cable already goes through, and you bolt into one of the tailhousing bolts. The cable comes from the carb to the tailshaft bolt, pulls a 180, then attaches to the kickdown.


Top
   
 Post subject:
PostPosted: Fri May 06, 2005 2:26 pm 
Offline
Board Sponsor
User avatar

Joined: Mon Jan 12, 2004 4:20 am
Posts: 2011
Location: Argentina
Car Model:
727 and 904 are indeed the same cable. code is H....xxx...2727 or something like that :wink:

_________________
Juan Ignacio Caino

Please use e-mail button istead of PM'ing. I do log in sometimes but I'll be answering quicker thru e-mail.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Ahrefs [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited