Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Dec 02, 2024 12:05 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Mon Aug 01, 2005 6:30 pm 
Offline
Turbo Slant 6

Joined: Tue Jun 14, 2005 8:29 pm
Posts: 797
Location: Raleigh, NC
Car Model:
Folks, I can't find this in old posts. I count 10 bolts around the differential housing as I lay under my truck bed ('64 d100 1/2 ton shortbed with 3 speed) Is this the 8 3/4? I have found some surprisingly beefy parts in this truck merely, I guess, because it was a truck. Or is this the 7 something rear end?

Thanks in advance,
rock


Top
   
 Post subject:
PostPosted: Mon Aug 01, 2005 7:41 pm 
Offline
Turbo EFI
User avatar

Joined: Sat Jun 19, 2004 8:01 pm
Posts: 1937
Location: Rhine, GA
Car Model:
If the back cover has no bolts on it and is one piece, it is an 8 3/4.

If it has a rear cover that is held on by 10 bolts, it is an 8 1/4.

The only pickups that the 7 1/4 made it under were the 4-cylinder Dakotas.

_________________
82 D150-225/727
02 Dakota-3.9/5 speed
87 GMC C7000-8.2 Detroit Diesel/5+2


Top
   
 Post subject:
PostPosted: Mon Aug 01, 2005 8:51 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24449
Location: North America
Car Model:
Quote:
If the back cover has no bolts on it and is one piece, it is an 8 3/4.

If it has a rear cover that is held on by 10 bolts, it is an 8 1/4.
Not necessarily applicable to the OP's '64 truck. Remember, the 8-1/4" rear axle commonly identified by a 10-bolt cover wasn't introduced until 1969. There were lots of different rear axles prior to '66, many of which have 10-bolt covers. Best source of answer to this question is the FSM.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Tue Aug 02, 2005 5:15 pm 
Offline
Turbo Slant 6

Joined: Tue Jun 14, 2005 8:29 pm
Posts: 797
Location: Raleigh, NC
Car Model:
Thanks much to both y'all!

Heartened by both, and finally getting smart enough to do some web work after Jeb's reply, I crawled back under with the mosquitoes and found a casting number on the part of the body holding the pinion gear "stem"..the rear end has a welded cover facing the real back of the truck and 10 bolts "inside" facing the cab. The casting number is 2070741 with a smaller 23 cast underneath that next to the old time (pre-pentastar) logo . AIn't vehicle work fun!
Dennis
rock


Top
   
 Post subject:
PostPosted: Tue Aug 02, 2005 7:03 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24449
Location: North America
Car Model:
That there is an 8-3/4" rear axle. Congratulations.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Aug 02, 2005 7:07 pm 
Offline
Turbo EFI
User avatar

Joined: Fri Feb 28, 2003 6:55 pm
Posts: 1046
Location: Strasburg, VA
Car Model:
And you probably have the brake drums secured by a rather large nut - oh joy!!! Start looking for a suitable brake drum puller!


Top
   
 Post subject:
PostPosted: Thu Aug 04, 2005 10:37 pm 
Offline
Turbo Slant 6
User avatar

Joined: Sun Apr 24, 2005 10:26 am
Posts: 520
Location: Issaquah, WA
Car Model:
ok so a rearend with 8 bolts on the back is what????


Top
   
 Post subject:
PostPosted: Fri Aug 05, 2005 10:46 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24449
Location: North America
Car Model:
Quote:
ok so a rearend with 8 bolts on the back is what????
A 7-1/4" with one cover bolt missing...?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Fri Aug 05, 2005 5:12 pm 
Offline
Turbo Slant 6
User avatar

Joined: Sun Apr 24, 2005 10:26 am
Posts: 520
Location: Issaquah, WA
Car Model:
????????????????????????????????????????????????????
what years were the 7 1/4 used??????????????????????


Last edited by exoJjL on Fri Aug 05, 2005 6:48 pm, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Fri Aug 05, 2005 5:52 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24449
Location: North America
Car Model:
Quote:
????????????????????????????????????????????????????
what years were the 7 1/4 used?
'60 (Valiant) to '98 (Dakota).

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited