I am wanting to do a 3 inch on the front and 6 inch rear drop on my 83 short wide pickup. does anybody sell dropped spindles for this application , or is there a car spindle that will obtain these results?
I plan on doing a c-notch and putting the rearend above the springs...This vehicle is only for fun, wont be hauling anything in it...any comments on dropping one of these trucks would be helpful. I am aware that all the brake assemblies would need to be swapped to match the application also if using car spindles.
Thanks!
Bill

_________________
If ya haven't been there, you just wouldn't understand.....
My friends and I spent a LOT of money in the eighties to get me this way!!!!