Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Wed Nov 18, 2026 4:02 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Sat Oct 29, 2005 3:08 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Apr 20, 2005 5:22 am
Posts: 491
Location: Missouri City, Texas (Houston Area)
Car Model:
How much can you actually overbore a 225 Slant Six? The Mopar Six Cylinder Manual says 0.060 for 1960 - 1973 and 0.030 for 1974 - 1984.
Are these really conservative or absolute numbers? Are the numbers above only relavent to racing engines or any Slant Six?


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 3:19 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
The iron-block slant-6s tend to be very meaty and many of them can support a large overbore—"large" being 0.090" or even 0.100"—but if you're thinking of going beyond 0.040", it's critical on any engine to sonic-check the bore wall thickness, because at large overbores, if you happen to have a block with more than average core shift, you can weaken or break through the walls.

If you smoke, the Mopar Performance 6-cylinder engine manual makes a convenient stack of pieces of paper you can tear out, one at a time, and use to roll and then light cigarettes. If you don't smoke, it makes a nifty coffee mug rest or doorstop. The book contains an uncomfortably large number of factual errors, and even more statements that might not be out-and-out wrong, but are certainly overextended. These categorical overbore limits for all engines are a great example of the latter type.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 3:38 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
Dan is right again 40 thousand or possable 60 thousand. I bored my race engine out 100 thousand and hit a sand cast hole and had to sleave one cylinder. Also with that much bore we hard blocked the water jackets to prevent distortion Something we were going to do any way but you could not do that on a street engine. Thanks Ron Parker :D








Hey Has That Thing Got A Bagel Bamboozler In It


Top
   
PostPosted: Sat Oct 29, 2005 4:36 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Apr 20, 2005 5:22 am
Posts: 491
Location: Missouri City, Texas (Houston Area)
Car Model:
My shop manual for my 1980 D-150 says maximum overbore is 0.040.
Is this to be heeded or is this more cigarette paper material?


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 4:46 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
I'd probably be pretty cautious about overbore on the '80-up engines, but the takeaway point here is that there's no number in a book that can tell you what any particular engine will tolerate. A lot of times the service manual "maximum overbore" dimensions are governed not by the limits of the block, but by the service replacement pistons available from the manufacturer at the time the book was printed!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Sat Oct 29, 2005 4:55 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Apr 20, 2005 5:22 am
Posts: 491
Location: Missouri City, Texas (Houston Area)
Car Model:
So, if I overbore my '80 225 to 0.040 am I alright or should I expect problems? And if I have problems how will they show up?


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 5:16 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
I can't imagine you'd have a problem at 0.040" on an '80 engine, but what's the purpose of the overbore? Clean up damaged cylinders? Extract more performance?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 5:16 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
You will be fine with .40 over.

If the boring bar falls through the block its easy to find another.

I just bored my street block 40 over and it never even noticed. (It did like the nice bath they gave it before and after)

This may sound silly,,,,but a good visual inspection of the block is always in order before sending it to the shop,,,,look for holes and cracks etc...cuz it costs just as much money to tank a bad block as a good one.

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 7:43 pm 
Offline
Board Sponsor
User avatar

Joined: Mon Jan 12, 2004 4:20 am
Posts: 2011
Location: Argentina
Car Model:
what about that suggestion that reverting the piston assy (meaning, assembling it with the notch that indicates "forward" pointing backwards, you can reduce engine's friction and wear? BS too? I assembled my engine that way.... should I be concerned.... :cry:

_________________
Juan Ignacio Caino

Please use e-mail button istead of PM'ing. I do log in sometimes but I'll be answering quicker thru e-mail.


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 8:05 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
Done a 340 that way 9 years ago on a cruse in 65 Baracuda no problems. Some say you might git a little piston slap noise but with a 284 cam and flowmasters i aint ever heard any slap just burning rubber.
Thanks Ron Parker :D :D









Hey Has That Thing Got A Bagel Bamboozler In It


Top
   
 Post subject:
PostPosted: Sat Oct 29, 2005 9:45 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14979
Location: Park Forest, Illinoisy
Car Model: 78 Volare
Most any Slant block will go +.100", and some of the race car guys are going +.135". :shock:

_________________
Official Cookie and Mater Tormentor.


Top
   
PostPosted: Sun Oct 30, 2005 6:58 am 
Offline
EFI Slant 6
User avatar

Joined: Wed Apr 20, 2005 5:22 am
Posts: 491
Location: Missouri City, Texas (Houston Area)
Car Model:
The machinist said he had to go to 0.040 to clean up one of the cylinders. The motor had 222,000 miles on it. I guess the extra displacement isn't all bad. :D I am hoping for some nice performance in a relatively heavy vehicle. You guys have really helped me put this together. This is my first attempt at anything like this and it is a hoot working on the Slant!

bwhitejr


Top
   
 Post subject:
PostPosted: Sun Oct 30, 2005 8:44 am 
Offline
TBI Slant 6
User avatar

Joined: Sun Oct 16, 2005 8:35 pm
Posts: 233
Location: Sioux Falls South Dakota
Car Model:
yeah i agree everyone one on here is very helpfull, on other message boards for my honda :shock: :evil: everyone is a street racing punk who flames you all the time. :x ive posted up some questions but nobody will awser them :shock: in the racing q and a and engine :shock:

_________________
Cuda Progress :D
The dart as it sits now :(


Top
   
 Post subject:
PostPosted: Tue Nov 01, 2005 11:21 am 
Offline
Board Sponsor
User avatar

Joined: Tue Jan 14, 2003 2:37 pm
Posts: 605
Location: Fairbanks, AK
Car Model:
My '87 block in my '87 D150 is .080" over.

No problems to date.

-S/6

_________________
The "Silver Bullet"
87 Ram D150
Image


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 2:45 pm 
Offline
TBI Slant 6
User avatar

Joined: Sun Oct 16, 2005 8:35 pm
Posts: 233
Location: Sioux Falls South Dakota
Car Model:
wow 80 over dang thats alot id like to do my block .60 over i dont really know where to find pistons :( i found molly rings on summit but no pistons :evil:

_________________
Cuda Progress :D
The dart as it sits now :(


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 18 posts ]  Go to page 1 2 Next

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot] and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited