Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Wed Nov 18, 2026 12:26 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 12 posts ] 
Author Message
 Post subject: 78 Aspen Super six
PostPosted: Tue Nov 01, 2005 6:28 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Apr 28, 2005 2:09 pm
Posts: 488
Car Model:
Failed emmision because of Carbon Monoxide. Hydrocarbons were low.

I'll admit I put some of that "Fuel system" cleaner in about a third of a tank of gas. (dumb) and ran it through. Would that be it?

Any help would be appreciated.


Top
   
 Post subject:
PostPosted: Tue Nov 01, 2005 10:35 am 
Offline
Turbo EFI
User avatar

Joined: Mon Jul 14, 2003 10:02 am
Posts: 1817
Location: Southeastern Pennsylvania
Car Model:
High CO readings indicate a non working catalytic converter

_________________
ImageImage


Top
   
 Post subject:
PostPosted: Tue Nov 01, 2005 10:45 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Could be a faulty catalytic converter. Could also be a great many other things, from a faulty air injection system to a dirty air filter or plugged air bleeds in the carburetor. I don't think the fuel system cleaner you put in is the cause. Can you post your full test results for us to take a look at?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Nov 01, 2005 1:17 pm 
Offline
Supercharged
User avatar

Joined: Mon Sep 26, 2005 5:09 pm
Posts: 2946
Location: Gilbert, Arizona
Car Model: 1962 Plymouth Valiant Signet
I had an 85 Dodge pickup with a 318, that I bought in Oklahoma where there were no emissions tests. When I moved to Colorado it wouldn't pass because of high CO levels. I suspected the catalytic converter because the nozzle restrictor had been chiseled out; of course the only reason to do that is to run leaded fuel. I took the truck to a muffler shop where they cut the tailpipe loose and looked at the converter. They told me it was fine, though I'm still not convinced to this day. I ended up putting smaller jets in the carburetor to get it to pass. That probably has no bearing on this problem, but it reminded me...

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.


Top
   
 Post subject:
PostPosted: Tue Nov 01, 2005 1:45 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Quote:
I had an 85 Dodge pickup with a 318, that I bought in Oklahoma where there were no emissions tests. When I moved to Colorado it wouldn't pass because of high CO levels.
Very common when moving a non-High-Altitude-Certified, carbureted vehicle to high altitude. Less Oxygen-dense air = richer mixture = more HC and CO in the exhaust. You did the right thing by jetting down the carburetor. As far as your exhaust shop, I'm not sure what they thought they were looking for. Those who misfuelled their unleaded vehicles with leaded fuel usually didn't bother gutting the catalyst, they just let it die from leaded gas.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Nov 01, 2005 3:50 pm 
Offline
Supercharged
User avatar

Joined: Mon Sep 26, 2005 5:09 pm
Posts: 2946
Location: Gilbert, Arizona
Car Model: 1962 Plymouth Valiant Signet
That was kind of my take on it too.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 5:34 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Apr 28, 2005 2:09 pm
Posts: 488
Car Model:
Ok, here are the readings.

Pollutant 1st Idle Precon Final Standard
Hydros 129 136 154 250 Pass
CO 2.97 3.18 3.38 2.00 Fail

The last time it was passed was 2000
But it flew through

It fired right up and runs great!

Help!

I was just going to pull the engine for a project but with gas the way it is, I'd like to take advantage of the OD tranny!


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 7:43 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Your hydrocarbons look OK, not super-great but certainly OK. Your CO, yeah, is out of line. What's been done on the car recently? How long since a careful tuneup?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 8:42 am 
Offline
Turbo EFI
User avatar

Joined: Sat Jun 19, 2004 8:01 pm
Posts: 1937
Location: Rhine, GA
Car Model:
When was the last time you checked your timing?

_________________
82 D150-225/727
02 Dakota-3.9/5 speed
87 GMC C7000-8.2 Detroit Diesel/5+2


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 10:06 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Apr 28, 2005 2:09 pm
Posts: 488
Car Model:
Quote:
Your hydrocarbons look OK, not super-great but certainly OK. Your CO, yeah, is out of line. What's been done on the car recently? How long since a careful tuneup?
Quite a while!

That's this weekend.

You only get 2 Fails and then it kicks it to another level and I don't want to pay Joe's Garage to make it pass before I talked to you, Very Intelligent Car Geniuses


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 10:08 am 
Offline
3 Deuce Weber

Joined: Fri Sep 03, 2004 10:19 pm
Posts: 89
Location: Alameda, CA
Car Model:
High CO usually indicates a rich condition. I'd start with the carburetor: check that the choke works properly, float adjusted OK, air filter not clogged (as Dan suggested), etc.

You can ask the smog guys about a pre-test (unofficial test where the results are not reported to the state) to check your repairs before the official test, to help avoid being bumped to the next level.

Steve


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2005 10:18 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Apr 28, 2005 2:09 pm
Posts: 488
Car Model:
Quote:
High CO usually indicates a rich condition. I'd start with the carburetor: check that the choke works properly, float adjusted OK, air filter not clogged (as Dan suggested), etc.

You can ask the smog guys about a pre-test (unofficial test where the results are not reported to the state) to check your repairs before the official test, to help avoid being bumped to the next level.

Steve
I'll check into that.

I'm in AZ BTW.

Thanks


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: DuckDuckGo [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited