I am currently trying to get my first slant six running. Its in a 64 Valiant wagon. Please forgive me, I don't know much about MOPAR. I have a 2bbl super 6 intake manifold and I need to buy a carb to fit it. What size and brand would you recommend? I plan to beef up the Exhaust, ignition, and intake. Please advise.
THanks


[/img]

Here is some useful reading for you. Read it. All of it. Twice.

http://www.slantsix.org/articles/supersix/article.htm

Welcome to the forum and good luck weith your project!

A lot of folks use Carter BBD. It's probably one of the easier carbs to use for this application. Because it was used by the factory in the Super Six, cables, kickdowns, and such fit. That is what I have on the shelf and plan to put on my '64, when I get around to it.
Others use assorted Holleys, including the Holley/Weber 5200 series progressive 2-barrels, and who knows what else.

_________________
"When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss

1964 Valiant V200, 225/Pushbutton 904
BBD, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO

Yep, a carefully-picked Carter BBD in good condition would be my pick to start out with.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.