I was searching summit some more and i searched specifically for the inline six, blah blah blah, anyways i have found a whole lot more \6 parts. This includes pistons - 20,30,60 and 80 over with rings 9.99 each Also mech lifters, and i was searching earlier and found pushrods you can cut to your length.

_________________
Cuda Progress
The dart as it sits now

Very cool! I had no idea Summit had that stuff. Some of those Erson Cams look pretty nice and a great deal.

Lou

_________________
Home of Slant6-powered fun machines since 1988

PAW has a ton of stuff too. catalog is spendy though.

I found several items for my slant 6 through summit. Hard to believe
they have as much for a slant six as they do! Over half of my hop up
parts came from them!! Good service to! Threw me in a free hat to!
But they should have as much cash as I've laid down on them

not everything shows up at summit with their online catalog and normal searching procedures..........


Often you need to search on a manufacturers part number (summit usually prefixes a manufacturers part number with 3 letters, look at how they do it and you'll get the idea). So figure out what you need, then see if they have it............

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

Summit is WAY better than Jeg's, which seemed to be obssesed with Chivvys and 5.0 Moostangs.

_________________
82 D150-225/727
02 Dakota-3.9/5 speed
87 GMC C7000-8.2 Detroit Diesel/5+2

Summit is really good about fast shipping too. Jeg's isn't too bad on that either but doesn't have the Mopar selection of Summit.

_________________
"Former Owner" of '65 Barracuda, 225, Auto, MP 2bbl intake, MP cam, Dutra Duals. Presently Moparless.

I actually had my first bad experience with Summit the other day. Called up to see what they had for front struts on my GTS, and got stuck talking to Ravishing Rick Rude*, apparently. I asked him how the calibration of the GR2 compared to the Gas-Adjust, but he answered as though talking to a 5-yr old and then hung up on me!

*Actually, that's probably an insult to Mr. Rude, who could probably turn me into cream corn if he wanted to.

Anyway, they're usually very good to deal with, and prompt too.

_________________
O==\=/==O

"A mechanic is Somebody."
- Jim Preston

I have been doing a lot of searching for /6 stuff on summit for awhile. I found a set of headers for it finally. But they didn't give any specs as to what it would be used for. Obviously the /6 but I don't know if it could work in my Dodge D150 pickup. I am really tempted to buy it but I need more info on it.

_________________
I blew up 2 slant 6's...So they are destructable after all.

440, let me know where you find a set. I'm looking also, sorry Doug. I would like to get a set of 6 to 1's but would settle for the 3x2's. Just can't afford the Dutra duels right now.

_________________
85' D100
225cid
A833OD

Ditto that, I need a set for my 81 D150 too. ALready got the intake and carb ready.

I got a set from summit for my 70 challenger and they worked great..

Hey challanger What brand are they??

Greg

_________________
http://www.youtube.com/hyperpack

This is the set i have on my /6 Challenger
Brand: Hooker Headers
Product Line: Hooker Super Competition Headers
Part Type: Headers
Part Number: HOK-5602HKR
Header Material: Steel
Header Finish: Painted
Header Style: 6-2 style
Primary Tube Diameter (in): 1 5/8 in.
Collector Attachment: 3-bolt flange
Collector Diameter: 2.500 in.
Tuned: Yes
Primary Tube Length (in): 40 in.
Primary Tube Gauge: 18-gauge
Flange Style: Standard
Flange Thickness (in): 5/16 in.
Bolts/Studs Included: Yes
Gaskets Included: Yes
Reducers Included: No
Y-Pipe Included: No
Quantity: Sold as a pair.

Headers, Super Competition, 6-2, Steel, Painted, Dodge/Plymouth, 198/225, L6, Pair

$449.95

I got a set of the Hooker Headers from Summit for my 67 Dart and they work great

_________________