Quote:
If you have the large bolt pattern 4 1/2 inch, there are several different styles available in the aftermarket. If I remember correctly some of the late model mustang wheels will fit.
I am running a set of 17x8" Mustang Bullitt rims on my 77 Aspen. it has the larger 4.5" bolt pattern. I did run into issues with the center bore of the wheel being too small. I corrected this (and the offset issue) by running a set of aluminum hubcentric spacers. I've also heard of somone boring out the center bore on the wheel slightly with a barrel sander to acheive the same effect, but the offset of the wheels ended up being slightly off.
