Hello all,

We are in for one and have sent a PM....We will get the exact size needed in the next couple of days. Thanks,

Gerry, G-Pop Shop

_________________
Gerry, G-Pop Shop
Specializing in rebuilt and new turbos,
turbo upgrades, turbo rebuild kits, and turbo parts
www.gpopshop.com
(479)-751-7966

just got the Isky o-ring tool in the mail, looks simple to use,now i am ready to tear down and start the rebuild before racing starts in june, still snow, rain and fog here.

There is a increase in the gasket pricing, from what was originally quoted.
This is a E-mail I recieved, today. Those that want the gaskets, please confirm. If anyone wants to back out, I understand. Let me know.
-------------------------------------------------------------------------------------

Charlie: I received your voice message.

My apologies for not explaining the reason for the pricing differences I first
quoted you.

The pricing I initially quoted you was for a four cylinder gasket. It wasn't
until I received the program and the drawing that I realized your gasket needs
to be priced for a six cylinder. Six cylinder gaskets are priced a little
higher than four cylinder gaskets. I hope this clarifies the pricing
discrepancy.

Thank you.



-----Original Message-----
From: Saunders, Mary
Sent: Wednesday, March 25, 2009 3:31 PM
To: 'flturbo6@aol.com'
Subject: RE: Gaskets

Charles: Your sample has been programmed. Your part number is: CR-170 3.380.

The following will be your $500.00 minimum order pricing:

.024 - .069 - $83.46/each
.070-.078 - $89.43/each
.080 - .088 - $93.97/each
.090 - .098 - $109.28/each
.100 - .125 - $124.69/each

Please let me know if you need any additional information.

Thank you.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

still in.

Whats the dead line.
I would only need this gasket if the smaller cam I installed wants to cause detonation issues. I should know by Saturday if I need it.

_________________
67Cuda,FAST EZEFI,340cu,CR=10.25,RollerCam&Rocker (XR268HR,#20-810-9)(#1622-16)(EddyRPM#60779,#7576), (MSD6AL,#6425) A904, GearVendorsOD, 8 1/4,3.55:1, ClassicAir

charlie i will still have 2@ .040 3.480 bore.do you want everyone to pm you again?

It would be best to PM again. I had set a deadline of April 5th which is Sunday, but if others would want it extended, a little bit, it could be done. I just don't want to delay people, that are building engines, and are waiting for the gasket. As it is there will be a delay, due to the method of shipping (has to come to me first, then be reshipped).

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

We would still like one as well, we need a .100 - .125 - $124.69/each for a .045 over. We will send a PM as well. Thanks,

_________________
Gerry, G-Pop Shop
Specializing in rebuilt and new turbos,
turbo upgrades, turbo rebuild kits, and turbo parts
www.gpopshop.com
(479)-751-7966

Tommorrow is the cutoff for confirming an order for the gaskets. I will post a list of those wanting to order, and the sizes, to make sure I have it correct. I will then contact Hussey with the order, and get the exact pricing. Then PM everone, with the amount, for the final OK. I will then confirm the final order with Hussey. I will be able to accept Paypal, or money orders, once I have the shipment, here, and can determine the final shippimg charges.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

thanks charlie i have just setup a paypal account,so i am ready to go.

I will only be able to accept paypal NON credit card payments, as I do not have a premier acct.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Everone that wants gaskets, please check this list. Make sure I have everything correct;
definate order

G-pop shop.......1) 3.440 bore .125 thick

Greg Ondayko...2) 3.500 bore .042 thick

Mod5j................2) 3.504 bore .042 thick

terrylittlejohn.....2) 3.480 bore .042 thick

joshie225...........2) 3.504 bore .042 thick

shaker223..........1) 3.460 bore .046 thick

lowbudget..........1) 3.400 bore .042 thick

robsimmons.......2) 3.504 bore .042 thick

heckshemi.........1) 3.500 bore .024 thick

Charrlie_S.........1) 3.440 bore .042 thick

66aCuda...........2) 3.504 bore .042 thick


Maybes let me know ASAP. Want to get the order in. I will keep this open untill 8:00 am eastern time Wed April 8th 2009. I will send the order to Hussey later, that morning.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Sorry about not PMing you Charrlie. I just called Gary.

Please put us down for 2 of them.

.040 (.042) thick with a 3.504 bore diameter.

My Paypal is set up for credit card only, so I'll have to send you a money order if that's okay.

_________________
Rob

I’m Mater
The Kentucky Poser

Charrlie, sent you a PM. Hope it's not to late. I want one .024" x 3.500".
Thanks

_________________
Franklin
'61 Valiant

Gasket order is in. They should be ready in 5-7 work days, then shipping to me.
Once I have them, I can figure in the shipping cost, and let everyone know. I can accept non credit card PayPal (prefered), or postal M.O. is OK. Hopefully everyone will have their gaskets in about 2 1/2 weeks.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225