just got the Isky o-ring tool in the mail, looks simple to use,now i am ready to tear down and start the rebuild before racing starts in june, still snow, rain and fog here.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Copper head gasket group buy. https://slantsix.org/forum/viewtopic.php?t=34343 |
Page 3 of 4 |
| Author: | G-Pop Shop [ Thu Mar 26, 2009 9:29 am ] |
| Post subject: | |
Hello all, We are in for one and have sent a PM....We will get the exact size needed in the next couple of days. Thanks, Gerry, G-Pop Shop |
|
| Author: | terrylittlejohn [ Fri Mar 27, 2009 11:05 am ] |
| Post subject: | |
just got the Isky o-ring tool in the mail, looks simple to use,now i am ready to tear down and start the rebuild before racing starts in june, still snow, rain and fog here.
|
|
| Author: | Charrlie_S [ Mon Mar 30, 2009 6:37 pm ] |
| Post subject: | Priceing change |
There is a increase in the gasket pricing, from what was originally quoted. This is a E-mail I recieved, today. Those that want the gaskets, please confirm. If anyone wants to back out, I understand. Let me know. ------------------------------------------------------------------------------------- Charlie: I received your voice message. My apologies for not explaining the reason for the pricing differences I first quoted you. The pricing I initially quoted you was for a four cylinder gasket. It wasn't until I received the program and the drawing that I realized your gasket needs to be priced for a six cylinder. Six cylinder gaskets are priced a little higher than four cylinder gaskets. I hope this clarifies the pricing discrepancy. Thank you. -----Original Message----- From: Saunders, Mary Sent: Wednesday, March 25, 2009 3:31 PM To: 'flturbo6@aol.com' Subject: RE: Gaskets Charles: Your sample has been programmed. Your part number is: CR-170 3.380. The following will be your $500.00 minimum order pricing: .024 - .069 - $83.46/each .070-.078 - $89.43/each .080 - .088 - $93.97/each .090 - .098 - $109.28/each .100 - .125 - $124.69/each Please let me know if you need any additional information. Thank you. |
|
| Author: | Shaker223 [ Mon Mar 30, 2009 7:19 pm ] |
| Post subject: | |
still in. |
|
| Author: | Bren67Cuda904 [ Mon Mar 30, 2009 7:43 pm ] |
| Post subject: | |
Whats the dead line. I would only need this gasket if the smaller cam I installed wants to cause detonation issues. I should know by Saturday if I need it. |
|
| Author: | terrylittlejohn [ Mon Mar 30, 2009 9:08 pm ] |
| Post subject: | |
charlie i will still have 2@ .040 3.480 bore.do you want everyone to pm you again? |
|
| Author: | Charrlie_S [ Tue Mar 31, 2009 5:06 am ] |
| Post subject: | |
It would be best to PM again. I had set a deadline of April 5th which is Sunday, but if others would want it extended, a little bit, it could be done. I just don't want to delay people, that are building engines, and are waiting for the gasket. As it is there will be a delay, due to the method of shipping (has to come to me first, then be reshipped). |
|
| Author: | G-Pop Shop [ Fri Apr 03, 2009 2:09 pm ] |
| Post subject: | |
We would still like one as well, we need a .100 - .125 - $124.69/each for a .045 over. We will send a PM as well. Thanks, |
|
| Author: | Charrlie_S [ Sat Apr 04, 2009 5:48 am ] |
| Post subject: | |
Tommorrow is the cutoff for confirming an order for the gaskets. I will post a list of those wanting to order, and the sizes, to make sure I have it correct. I will then contact Hussey with the order, and get the exact pricing. Then PM everone, with the amount, for the final OK. I will then confirm the final order with Hussey. I will be able to accept Paypal, or money orders, once I have the shipment, here, and can determine the final shippimg charges. |
|
| Author: | terrylittlejohn [ Sat Apr 04, 2009 2:52 pm ] |
| Post subject: | |
thanks charlie i have just setup a paypal account,so i am ready to go. |
|
| Author: | Charrlie_S [ Sat Apr 04, 2009 4:12 pm ] |
| Post subject: | |
Quote: I will be able to accept Paypal, or money orders, .
I will only be able to accept paypal NON credit card payments, as I do not have a premier acct.
|
|
| Author: | Charrlie_S [ Tue Apr 07, 2009 5:50 am ] |
| Post subject: | |
Everone that wants gaskets, please check this list. Make sure I have everything correct; definate order G-pop shop.......1) 3.440 bore .125 thick Greg Ondayko...2) 3.500 bore .042 thick Mod5j................2) 3.504 bore .042 thick terrylittlejohn.....2) 3.480 bore .042 thick joshie225...........2) 3.504 bore .042 thick shaker223..........1) 3.460 bore .046 thick lowbudget..........1) 3.400 bore .042 thick robsimmons.......2) 3.504 bore .042 thick heckshemi.........1) 3.500 bore .024 thick Charrlie_S.........1) 3.440 bore .042 thick 66aCuda...........2) 3.504 bore .042 thick Maybes let me know ASAP. Want to get the order in. I will keep this open untill 8:00 am eastern time Wed April 8th 2009. I will send the order to Hussey later, that morning. |
|
| Author: | Rob Simmons [ Tue Apr 07, 2009 7:58 am ] |
| Post subject: | |
Sorry about not PMing you Charrlie. I just called Gary. Please put us down for 2 of them. .040 (.042) thick with a 3.504 bore diameter. My Paypal is set up for credit card only, so I'll have to send you a money order if that's okay. |
|
| Author: | heckshemi [ Tue Apr 07, 2009 12:02 pm ] |
| Post subject: | |
Charrlie, sent you a PM. Hope it's not to late. I want one .024" x 3.500". Thanks |
|
| Author: | Charrlie_S [ Thu Apr 09, 2009 3:27 pm ] |
| Post subject: | |
Gasket order is in. They should be ready in 5-7 work days, then shipping to me. Once I have them, I can figure in the shipping cost, and let everyone know. I can accept non credit card PayPal (prefered), or postal M.O. is OK. Hopefully everyone will have their gaskets in about 2 1/2 weeks. |
|
| Page 3 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|