Quote:
Get something that is used on window tint. Ammonia should not be used on tint. Stores like Ziebart have it.
Tom
Tom I bet you can get me a 55Gal Drum of that stuff from Ziebart Tom
Greg
| Slant Six Forum https://slantsix.org/forum/ |
|
| 1968 Valiant Ruster Racer IRWIN PA https://slantsix.org/forum/viewtopic.php?t=36132 |
Page 22 of 87 |
| Author: | Rob Simmons [ Tue Mar 22, 2011 5:31 am ] |
| Post subject: | |
Very Nice! I think I'm gonna have to replace my lexan stuff on the GodsRods Duster II. I'm not sure it can be polished back to usable. Definitely never THAT clear again! You can't even tell it's in there. |
|
| Author: | Shaker223 [ Tue Mar 22, 2011 6:58 am ] |
| Post subject: | |
Looks very good!! |
|
| Author: | Greg Ondayko [ Tue Mar 22, 2011 8:54 am ] |
| Post subject: | |
Quote: Very Nice!
This windshield will prolly never be that clear again either...I think I'm gonna have to replace my lexan stuff on the GodsRods Duster II. I'm not sure it can be polished back to usable. Definitely never THAT clear again! You can't even tell it's in there. THe instructions say to never clean it with an amonia based cleaner such as windex. They make a special plastic window cleaner for lexan. I might have to get a bottle now. Greg |
|
| Author: | Shaker223 [ Tue Mar 22, 2011 9:26 am ] |
| Post subject: | |
Get something that is used on window tint. Ammonia should not be used on tint. Stores like Ziebart have it. Tom |
|
| Author: | Greg Ondayko [ Tue Mar 22, 2011 11:44 am ] |
| Post subject: | |
Quote: Get something that is used on window tint. Ammonia should not be used on tint. Stores like Ziebart have it.
Tom I bet you can get me a 55Gal Drum of that stuff from Ziebart Tom Greg |
|
| Author: | 1974duster kev [ Tue Mar 22, 2011 4:23 pm ] |
| Post subject: | |
What the hell is ziebart lol Kev |
|
| Author: | madmax/6 [ Tue Mar 22, 2011 7:38 pm ] |
| Post subject: | |
Screw it in,trust me its alot easier and better than trying to rivet it.Guzzi Mark |
|
| Author: | Romeo Furio [ Wed Mar 23, 2011 5:50 am ] |
| Post subject: | |
Greg, some guys use a product called Plexas ( I'm sure I spelled it wrong ) that you get from a motorcycle shop for bike windshields to clean and polish the plexiglass. |
|
| Author: | Romeo Furio [ Wed Mar 23, 2011 6:01 am ] |
| Post subject: | |
Hey While looking over your photos and while it's raining you can pull and gut the steering column. I still see the turn signal lever and the PRND21 also the wiring and shift tube. You may loose a few more ounces,,just don't eat a big mac before going down the track!! |
|
| Author: | Greg Ondayko [ Wed Mar 23, 2011 7:36 pm ] |
| Post subject: | Windshield In 3-23-11 |
Romeo, Good Eye, I have been Eyeing up the column for enlightenment for a while - Just havent gotten to it yet. Lots of Heavy Stamped mounting hardware and The Shift tube etc can all come off. I might leave the turn signal stuff in for now. We'll see. Mark, I did use rivets 'cause That's what I started with and had lying around to use. I know screws are the better route but in the interest of time the rivets won this battle  Here are some pics of the windshield final install: The A Pilliars look like some sort of aircraft part 'Cause I used so many Rivets so close togther... Oh well It adds to the hodge-podge look of ruster        Greg |
|
| Author: | Shaker223 [ Thu Mar 24, 2011 5:11 am ] |
| Post subject: | |
That steel floor looks out of place now with the aluminum block off panel. I think you need an aluminum floor now.
|
|
| Author: | Dart270 [ Thu Mar 24, 2011 5:39 am ] |
| Post subject: | |
Nice work. Why soooo many rivets? Lou |
|
| Author: | Greg Ondayko [ Thu Mar 24, 2011 5:47 am ] |
| Post subject: | |
Quote: Nice work. Why soooo many rivets?
First time race car build mistake.Lou I laid out my window in 1" increments and started drilling. oh well. My windshield will not fly out. Greg |
|
| Author: | Rob Simmons [ Thu Mar 24, 2011 1:45 pm ] |
| Post subject: | |
I'm not sure plexiglass cleaner is going to work for mine...  http://img194.imageshack.us/img194/8616 ... terii4.jpg I still need to get around to following your lead on the front bumper. I have four of them sitting in the bed of the truck waiting to be cut up.
|
|
| Author: | wvenable [ Thu Mar 24, 2011 2:25 pm ] |
| Post subject: | |
Greg, I like over engineering!!!! You are right it is not goin' anywhere. |
|
| Page 22 of 87 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
