Slant Six Forum
https://slantsix.org/forum/

Need Help Building My Slant Six.
https://slantsix.org/forum/viewtopic.php?t=23384		 Page 4 of 5
Author:  dakight [ Wed Jun 06, 2007 6:21 pm ]
Post subject: 
The Oklahoma State Fair is held in Oklahoma City. I guess I'm a bit amused that they would have a Canadian supplier bring Tipis to the heart of Indian Country. Nothing wrong with it mind you, but just one of those things that seems a little out of kilter.
Author:  sandy in BC [ Wed Jun 06, 2007 6:29 pm ]
Post subject: 
I can explain. They put out a tender for product and services.....and put a cap on price. The price was too low... so we just bid what we normally would. No one else bid so they gave it to us (and are paying what we bid). The real clincher was we would deliver and train their staff.

" Never been to Oklahoma.....but Ive been to Arizona" What does it matter?
Author:  Ron Parker [ Wed Jun 06, 2007 7:01 pm ]
Post subject: 
Might have to drive home on Sunday but if we have time trials line up against me and I will put up 50 dollars and you do the same all goes to Chuck. Do you feel Lucky. Well do you Canada Boy. Thanks Ron Parker :D PS I will drink Red Ale on monday Thanks Ron Parker :D









Jaggers Fabrication Slanted Attitude Dart
Author:  slantzilla [ Wed Jun 06, 2007 9:05 pm ]
Post subject: 
If we get a big bunch for St. Louis I will go. Maybe we just need to call the tower and tell them we need to run before 6 at night when we only get 1 time run at 10 am. :shock:

I will donate what I can. Hopefully I am back to work by then. Right now I'm so broke I can't even pay attention. :oops:
Author:  Doctor Dodge [ Wed Jun 06, 2007 9:31 pm ]
Post subject: 
Quote:
...call the tower and tell them we need to run before 6 at night, when we only get 1 time run at 10 am.
Sounds like Las Vegas... except you don't get a time run there. :roll: :wink:
DD
Author:  dakight [ Thu Jun 07, 2007 4:55 am ]
Post subject: 
Quote:
I can explain. They put out a tender for product and services.....and put a cap on price. The price was too low... so we just bid what we normally would. No one else bid so they gave it to us (and are paying what we bid). The real clincher was we would deliver and train their staff.

" Never been to Oklahoma.....but Ive been to Arizona" What does it matter?
Well that sounds like it worked out for you. October in Oklahoma is usually pleasant except fot the occasional thunderstorm.
Author:  slantvaliant [ Thu Jun 07, 2007 6:12 am ]
Post subject: 
Quote:
I guess I'm a bit amused that they would have a Canadian supplier bring Tipis to the heart of Indian Country.
Those tipi-dwellers really got around, didn't they? :wink:
Quote:
...just one of those things that seems a little out of kilter.
Kilter? The Scots are here, too? :shock:
Author:  Ron Parker [ Thu Jun 07, 2007 4:18 pm ]
Post subject: 
That all we got at Valdosta 1 time run been there done that. Time run at 10 am first round at 3 pm. This is difficult racing that is why i use two weather stations and do certain prep on the car. Bagel I know you and you are my friend. Lost my job in march on my birthday. But you can not keep good people down. Can you be the contact to the promoter or track and I can handle the purse. Your racing friend Possum :D







Jaggers Fabrication Slanted Attitude Dart
Author:  dakight [ Thu Jun 07, 2007 5:20 pm ]
Post subject: 
Quote:
Quote:
...just one of those things that seems a little out of kilter.
Kilter? The Scots are here, too? :shock:
We're everywhere :twisted:
I could have that is was "A half bubble out of plumb." :lol:
Author:  Ron Parker [ Thu Jun 07, 2007 6:19 pm ]
Post subject: 
Ok hell I can tune duct tape for any purpose. But you can tune a piano but you cant tune a fish. Thanks Ron Parker :D Tipi what the hell is that. :D










Jaggers Fabrication Slanted Attitude Dart
Author:  sandy in BC [ Thu Jun 07, 2007 7:49 pm ]
Post subject: 
Image

This week I delivered one that was 30 ft in diameter and fully painted. It took 1 hour and 10 mins to pitch.
Author:  Ron Parker [ Fri Jun 08, 2007 4:11 pm ]
Post subject: 
That is so cool now I know what a tipi is. Thanks Ron Parker.












Jaggers Fabrication Slanted Attitude Dart
Author:  Dago Red [ Fri Jun 08, 2007 6:37 pm ]
Post subject:  But I Kinda Like The Music
:lol: If we're gonna have a whole slew of Slanters in St. Louie, I'd better get my butt back out to the shop. Sandy, OKC is a reasonable 8-9 hours from St Louis. Just get on I-44 and get off at Oklahoma City. The Texas bunch usually hits the Monster with a crowd, so if ya need something hauled, just track us down. "Work, work, work, work, work!! Gentlemen, we've gotta protect our phoney-baloney jobs!!!!"
Author:  Ron Parker [ Sat Jun 09, 2007 7:01 pm ]
Post subject: 
This is a 550 mile pull for me one way but i would like to see if we could put this package together. Thanks for everybodys help maybe I need to make a new post. Thanks Ron Parker :D










Jaggers Fabrication Slanted Attitude Dart
Author:  fredmueller1 [ Sat Jun 16, 2007 11:58 am ]
Post subject: 


My /6 block is at the machine shop right now!
Going to 1/2" head studs and some other goodies
maybe I can keep the head gasket in place
I should have enough time to sort it out again
High 12's are my goal!!

the kids dart is ready /6, auto, 9" ford w 3:70 gears, bbd 2 barrel, 6into 1 mp headers = alot of fun

Fred Mueller Turbo 83 d-150 Headin for St. Louis in sept!!
Page 4 of 5 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/