| Slant Six Forum https://slantsix.org/forum/ |
|
| What bolts are required? https://slantsix.org/forum/viewtopic.php?t=11826 |
Page 1 of 1 |
| Author: | '74 Sport [ Sun Feb 20, 2005 7:57 pm ] |
| Post subject: | What bolts are required? |
Two years ago, we seem to have not separated and labled very well the bolts mounting the A-904 auto tranny to the slant six. Can someone tell me the sizes and placement of the necessary bolts? Thanks, Jerry |
|
| Author: | Doctor Dodge [ Sun Feb 20, 2005 11:08 pm ] |
| Post subject: | |
Two 7/16 - 14 unc bolts (5/8 Hex head) that go in thru the block at each lower side and thread into the trans bellhousing. Four 3/8 - 16 unc bolts (9/16 Hex head) that go thru the bellhousing and thread into the engine block. (one of them is a little longer and goes thru the block and threads into the trans bell, just above the starter. DD |
|
| Author: | '74 Sport [ Mon Feb 21, 2005 10:35 am ] |
| Post subject: | |
Perfect, Doc, just what I needed. Now we can go throught our bags of bolts and look for those you described. I appreciate the help. Jerry |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|