| Slant Six Forum https://slantsix.org/forum/ |
|
| cracked k-frame around strut bushing https://slantsix.org/forum/viewtopic.php?t=12270 |
Page 1 of 1 |
| Author: | bossanova6 [ Thu Mar 17, 2005 11:08 am ] |
| Post subject: | cracked k-frame around strut bushing |
Hi, I"m doing a 65 valiant rebuild.The K-frame is cracked around the strut bushing on the passenger side.I was thinking about welding it.Anyone have any ideas? I have a 65 parts car and was going to swap the k-frame but it has the same problem (cracked on the passenger side)I'm sure this is a pretty common problem. thanks for all  your help in advance
|
|
| Author: | Chuck [ Sat Mar 26, 2005 10:07 pm ] |
| Post subject: | |
Just grind it clean and weld it up. Make sure the surface where the bushing sits is smooth if you are using the Moog bushings. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|