Does anyone know where I can get one of these for a '73 master cylinder?
The mopar part # is 2074960.
I can't get it at the dealership. I even called Koller and they don't have it.
Thanks
| Slant Six Forum https://slantsix.org/forum/ |
|
| Brake push rod bushing https://slantsix.org/forum/viewtopic.php?t=13686 |
Page 1 of 1 |
| Author: | sixty4dartgt [ Thu Jul 14, 2005 6:16 pm ] |
| Post subject: | Brake push rod bushing |
Does anyone know where I can get one of these for a '73 master cylinder? The mopar part # is 2074960. I can't get it at the dealership. I even called Koller and they don't have it. Thanks
|
|
| Author: | Pierre [ Thu Jul 14, 2005 6:22 pm ] |
| Post subject: | |
Are you talking about the small circular piece of rubber that holds the rod to the inside of the master cylinder so the rod can't fall out of the MC ? Sorry don't have parts book availible to look up part# These aren't availible anymore dealer, but one of the aftermarket brake places was selling them for like $3 a piece. I also heard of people using vaccum hose to do the job as well. Can't remember which off the top of my head, try either Stainless Steel brakes or MP brakes. |
|
| Author: | Dart270 [ Thu Jul 14, 2005 8:10 pm ] |
| Post subject: | |
magnumhp.com has 'em for $3 each. I ordered a few spares on my last transaction with them. Lou |
|
| Author: | Craig [ Thu Jul 14, 2005 9:07 pm ] |
| Post subject: | |
If you purchased a new/rebuilt master cylinder, that parts is supposed to come with it. If not, take it back and get one that has the part in the box. They somehow get lost during handling/shipping. |
|
| Author: | sixty4dartgt [ Thu Jul 14, 2005 10:35 pm ] |
| Post subject: | |
Thanks for the replies. I'll check it out. |
|
| Author: | Pierre [ Fri Jul 15, 2005 3:07 pm ] |
| Post subject: | |
Magnumhp.com, thanks Lou thats the one I was thinking of. Thought it was ssbc or mpbrakes but I haven't done any brake part hunting in a while |
|
| Author: | sixty4dartgt [ Fri Jul 15, 2005 4:04 pm ] |
| Post subject: | |
I ordered it today. Thanks again |
|
| Author: | sixsignet [ Fri Mar 31, 2006 8:18 am ] |
| Post subject: | |
Brake Systems Incorporated www.brakesystemsinc.com They are in Portland, OR I got two of these for $1.95 each. Part number 129495 |
|
| Author: | Valiantdogs [ Mon May 02, 2011 2:45 pm ] |
| Post subject: | |
Quote: Brake Systems Incorporated www.brakesystemsinc.com Thanks, a search got me here, and I just ordered a couple of these... still $1.95. They are in Portland, OR I got two of these for $1.95 each. Part number 129495 
|
|
| Author: | sixsignet [ Mon May 02, 2011 9:12 pm ] |
| Post subject: | |
Wow! Great job searching the site! |
|
| Author: | Valiantdogs [ Wed May 04, 2011 1:51 pm ] |
| Post subject: | |
Yep, worked good! Got 'em yesterday. Measurements are 1/4" inside diameter, a shave under 1/2" (.475") outside diameter, 1/4" long. Has a slit running lengthwise. Fairly hard rubber, or maybe plastic... Thanks again! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|