Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 1:38 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Nov 07, 2005 9:15 pm 
Offline
EFI Slant 6
User avatar

Joined: Fri Mar 25, 2005 10:27 am
Posts: 428
Location: Mexico City, Mexico
Car Model:
I ask this ´cause a couple of friends that work on performance shops toll me that I can close the acces of my PCV valve in the carb and put a small air cleaner in the Valve Cover in the place of PCV valve and that will make my engine look more "sport" and will not make adverse performance.

Image

How much truth is on that? will a cylinder run lean or will it not make any effect?, as I know PCV valve just make exchange of carter gases to mix with carburator gases and prevent some polution.

_________________
Mopar Muscle is well defend by Slant Six!

Valiant Duster 1971


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 9:18 pm 
Offline
Turbo Slant 6
User avatar

Joined: Thu Jun 09, 2005 8:33 pm
Posts: 745
Location: Rolla, MO
Car Model:
The PCV valve can't be easily deleted. In addition to taking care of pollution, it removes excess vapors from the crank case; without it, you can develop a positive pressure situation, eventually blowing oil seals and gaskets.


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 9:19 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Yeah, Cstryker is right. The PCV valve does not hurt performance, it helps it! Leave it in place.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 9:26 pm 
Offline
EFI Slant 6
User avatar

Joined: Fri Mar 25, 2005 10:27 am
Posts: 428
Location: Mexico City, Mexico
Car Model:
Ok, but a open way to get and evacuate air will not make the work? I got a small air filter (originally for remplace VW oil cap) that I can adapt to fit in place of PCV valve in the Valve Cover, and I can get another to put in the carb. But I still don´t know how good is this idea.

_________________
Mopar Muscle is well defend by Slant Six!

Valiant Duster 1971


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 9:38 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 25087
Location: North America
Car Model:
Quote:
Ok, but a open way to get and evacuate air will not make the work?
No, it will not. Your engine will get very much dirtier (and more water) in the crankcase. Leave the system alone! It's not hurting anything and it's helping you!
Quote:
I got a small air filter (originally for remplace VW oil cap) that I can adapt to fit in place of PCV valve in the Valve Cover, and I can get another to put in the carb. But I still don´t know how good is this idea.
Not good, don't do it.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Nov 07, 2005 9:43 pm 
Offline
EFI Slant 6
User avatar

Joined: Fri Mar 25, 2005 10:27 am
Posts: 428
Location: Mexico City, Mexico
Car Model:
Ok SSDan I undestand, don´t get angry. I will leave that valve alone and say hi to it everytime I open the hood.

_________________
Mopar Muscle is well defend by Slant Six!

Valiant Duster 1971


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 3:17 am 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 5:02 pm
Posts: 1868
Location: Waterloo, Iowa
Car Model: '23 T-bucket
By the way, Avenger.....next time your under the hood, take the valve out and shake it. If it rattles, your ok, if it doesn't get a new one. A stuck pcv valve will act like a closed system, and cause crankcase pressurization problems.

Roger


Top
   
 Post subject:
PostPosted: Tue Nov 08, 2005 4:26 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
Just for your info. Back in the "old days" in stock eliminator racing, we used to gut the PCV valve to get more air flow thru it. Gave the effect of a slightly larger carb. The carb did have to be rejetted for this to work, or it would run too lean. My advise, leave the PVC on the engine in good working order. Make sure the hose and the fitting at the carb are not plugged up.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited