Here is the one i like 225/Slant what the hell does it matter how many ci you have . That is a Classic logo .
Thanks Ron ParkerIt Aint Over Until I Win
| Slant Six Forum https://slantsix.org/forum/ |
|
| Emblem idea and how https://slantsix.org/forum/viewtopic.php?t=19794 |
Page 1 of 1 |
| Author: | Bren67Cuda904 [ Wed Sep 20, 2006 9:21 pm ] |
| Post subject: | Emblem idea and how |
With the mods planned for my engine it will have 260 cubic inches. I would like to put an emblem on my car that states this, but I don't want it to stick out to bad. First idea is just some stickers from a graphics shop. This is the cheapest but not great. The next idea is to replace the hood plate with custom CNC machined ones that say "260-6". This is ideal but I would think it would be very pricey. Ideas of how this can be done with out the high cost would be great. The last idea is self evedent in the picture. I checked with a trophy shop about this idea and they said they couldn't do it. http://www.renaissanceracing.com/images/260-6-Ideas.JPG Your thoughts please |
|
| Author: | emsvitil [ Wed Sep 20, 2006 9:31 pm ] |
| Post subject: | |
Get a 426 badge from a hemi, and put a decimal point in it so it's 4.26 which is a 260 in liters............. |
|
| Author: | Charrlie_S [ Thu Sep 21, 2006 5:48 am ] |
| Post subject: | |
There is a vendor on E-bay, that does decals. Can do pretty much anything you would like. Just need to send him a sketch. Goes by "mackdieseldude". He did the "powered by 170 slant six" decals on my Cuda. |
|
| Author: | 64dartwagon [ Wed Sep 27, 2006 7:23 pm ] |
| Post subject: | Make it a Magnum |
On a friends car we took a new set of the V6 Magnum emblems and did a little cutting. We cut part of the V off and now it's /6 Magnum. Most people don't even notice. But the ones who catch it get a kick. |
|
| Author: | sick6 [ Thu Sep 28, 2006 12:14 pm ] |
| Post subject: | Re: Emblem idea and how |
Quote: The next idea is to replace the hood plate with custom CNC machined ones that say "260-6". This is ideal but I would think it would be very pricey. Your thoughts please
send me a PM, I work in a CNC shop, maybe we can work something out.do you have a material in mind for it to be made out of? |
|
| Author: | dart64rg [ Thu Sep 28, 2006 12:27 pm ] |
| Post subject: | |
Some existing options: ebay auction for a Ford Mustang 260 Emblem http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0017802928 ebay auction for a Mercedes 260 E emblem Silver http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0036877801 [/url] |
|
| Author: | slantvaliant [ Thu Sep 28, 2006 12:47 pm ] |
| Post subject: | |
I like the Mercedes piece as a starter. The Ford emblem has the wide "V" thing under it. Now, if it were going into a Valiant ... |
|
| Author: | Ron Parker [ Sat Sep 30, 2006 7:57 pm ] |
| Post subject: | |
Here is the one i like 225/Slant what the hell does it matter how many ci you have . That is a Classic logo . Thanks Ron ParkerIt Aint Over Until I Win |
|
| Author: | Ron Parker [ Sun Oct 01, 2006 6:35 pm ] |
| Post subject: | |
How are you going to get 260 ci out of a Slant unless you stroke it. Thanks Ron Parker It Aint Over Until I Win |
|
| Author: | Bren67Cuda904 [ Sun Oct 01, 2006 8:06 pm ] |
| Post subject: | |
Yep. Just dropped it off at the machine shop today. We may go a little more than 4.5 on the stroke. After the cleaning and measuring we'll see, but 4.5 is a minium goal. Were throwing around different ideas like stroking AND 198 rods with custom forged pistons with the oil rings in the wrist pin area. I'll let you know when the measurements come in. P.S. we are watching rod ratio. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|