I picked up a mopar action the other day and was reading that there is now a kit to put a electrionic od on a 904a by keisler. My question is, is a kit or a hole new trans. and will it work with the high start? Anyone else read this. mopar action april 2007 it start on page 72. If so, would it be a good investment

_________________
225+0.080 at 10:1
268cam
holley 390
clifford headers
8 3/4 355's lsd
kh brakes
electronic ing

Mm. See here and here.

Don't see mention of any such a kit on Keisler's site (they want you to replace your Torqueflite with a Tremec unit, and don't offer it with slant-6 bellhousing pattern), but Gear Vendors will sell you an electric-overdrive tailhousing replacement for an A904. Got a spare $3K...?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

For the cost of adding another gear that way you can buy a lot of fuel.

_________________

For 3.2K you can get a Richmond 6-spd w/ OD from Summit. From the little research I've done it looks like you're stuck having to have a bellhousing (or adapter) specially made for it though. Now THAT would be a cool way to go if it could be done without alot of heartache (and wallet pain). Myself I just read an article in this month's Car Craft about a new gearset for the 833 that offers an OD 4th gear. Looks like it'd be a great way to go for a slant powered car.

_________________
'74 Duster w/ HEI ignition, beat to snot suspension, A904, 8.25" 3.55 SG rear, still being tuned up and gets 17 MPG

Know how they always build a better idiot? That's me