| Slant Six Forum https://slantsix.org/forum/ |
|
| Aspen UCAs https://slantsix.org/forum/viewtopic.php?t=23349 |
Page 1 of 1 |
| Author: | bbbbbb9 [ Sat May 26, 2007 9:38 am ] |
| Post subject: | Aspen UCAs |
I've read lots of stuff on the Disc brake conversions and the use of A-Body vs F-Body components. My question is this. I have read you can use the F-Body UCAs (and other parts), but if you do you have to cut the adjust bar out and use an A-body bar correct? (This is going on a 66 Dart) |
|
| Author: | sandy in BC [ Sun May 27, 2007 7:25 am ] |
| Post subject: | |
Get an F body UCA (or 3) to play with. All will be revealed for very few dollars. Make sure you use a new set of A body adjusters. Be a pioneer! ....and if it doesn t work..come back and tell us why. |
|
| Author: | bbbbbb9 [ Sun May 27, 2007 8:58 am ] |
| Post subject: | |
HAHAHA. Probably how it should work but I'm a Wimp when it comes to build something that might have to be torn apart because it failed. LOL I thought I read it somewhere on here, but maybe not. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|