| Slant Six Forum https://slantsix.org/forum/ |
|
| Installing lifters https://slantsix.org/forum/viewtopic.php?t=23698 |
Page 1 of 1 |
| Author: | BlueMoose [ Thu Jun 21, 2007 2:33 pm ] |
| Post subject: | Installing lifters |
I have a rebuilt shortblock and a set of melling lifters. There are no instructions and found nothing related in the book so I just wanted to be sure... Some of the lifters have slightly different profiles (smaller/larger holes) and some are black and some mettalic (uneven number of each). At first I thought each color went to intake/exhaust side but there wasnt enough of each for that. So do I just pop these in in any order or what? |
|
| Author: | Greg Ondayko [ Thu Jun 21, 2007 6:18 pm ] |
| Post subject: | |
They really should all be tha same - Put them in in no particular order, But Use engine assembly lube on them. Are You dealing with an 81 - Newer Motor? 80 And Older lifters Should not have any holes in them as they are Solid Liter motors. Greg |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|