Torsion Bar install

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Suspension & Brakes

All times are UTC-07:00

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

73NorthernDuster

Post subject: Torsion Bar install

PostPosted: Mon Jun 25, 2007 9:13 am

Offline

3 Deuce Weber

Joined: Wed Mar 01, 2006 3:11 pm
Posts: 90
Location: Ontario, Canada
Car Model:

I bought a new set of .920 bars for my duster ($180 cdn tax in, from the dealer). I know there is a left and right bar, but does each bar have a front and back? The numbers on the bar don't tell me much other than one side is three numbers and one end has a two numbers and a letter.

Thanks in advance. Brent

_________________
Arizona Duster in Canada

Top

Profile

Reply with quote

slantvaliant

Post subject:

PostPosted: Mon Jun 25, 2007 11:26 am

Offline

Turbo EFI

Joined: Tue Feb 18, 2003 7:34 am
Posts: 2479
Location: Lubbock, Texas
Car Model: 1964 Plymouth Valiant V200 Sedan

They don't have formal front and back ends, but if you install them with the part numbers to the rear, you and the next owner have a chance of reading the numbers through the rear socket without pulling the bars out of the lower control arms.

_________________
"When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss

1964 Valiant V200, 225/Pushbutton 904
BBD, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO