| Slant Six Forum https://slantsix.org/forum/ |
|
| Stainless Steel Braided Hoses https://slantsix.org/forum/viewtopic.php?t=24327 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Fri Aug 03, 2007 7:22 pm ] |
| Post subject: | Stainless Steel Braided Hoses |
Does any one make Stainless Steel Braided Hoses For the F body? I think My Chung Sheng Brand ones are doing the Magic Check Valve Effect again... Thanks, Greg |
|
| Author: | slantzilla [ Mon Aug 06, 2007 7:07 am ] |
| Post subject: | |
I'm sure that if you check out Earl's you can find all the hoses and fittings you need Greg.  I have the setup for my '66 for whenever I get around to putting my Wilwoods on. Lines are pretty standard, just need a couple adapter fittings and you're good. |
|
| Author: | Greg Ondayko [ Mon Aug 06, 2007 7:06 pm ] |
| Post subject: | |
Thanks, Dennis, I will Look at Earl's Stuff Soon. The only Other Stuff I could find at the Parts store was Bendix Hose, Which I might Try In the meantime to get my car going straight when I put on the Brakes. Greg |
|
| Author: | Romeo Furio [ Tue Aug 07, 2007 4:43 pm ] |
| Post subject: | braided hose |
Greg, you got part of your question answered yourself.Stainless Steel Brake Corp. will have them. Yes Earl's plumbing too and that can be had at Jegs or Summit.Classic Tube also has kits too. |
|
| Author: | Romeo Furio [ Tue Aug 07, 2007 4:48 pm ] |
| Post subject: | Brake hoses |
Also try stopflex.com ( owned by Classic Tube ) 800-882-3711. If they don't have them they will make them for you.......... |
|
| Author: | Greg Ondayko [ Wed Aug 08, 2007 7:18 pm ] |
| Post subject: | |
Thanks Romeo, I will look into that!! Greg |
|
| Author: | volaredon [ Fri Aug 10, 2007 8:04 pm ] |
| Post subject: | |
If u find anything on this subject I'd be interested too, including the one to the rear axle. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|