| Slant Six Forum https://slantsix.org/forum/ |
|
| 465 holley on 225 https://slantsix.org/forum/viewtopic.php?t=24909 |
Page 1 of 1 |
| Author: | 68barracuda [ Fri Sep 14, 2007 12:39 pm ] |
| Post subject: | 465 holley on 225 |
Hey guys - what jetting and spring recommendations do you have for me please It is a 4150/60 vac sec Was converted with metering block I live at about 1250 Meters above see level - avg temp 22 centigrade Engine 9.2 CR 2 1/2 inch free flow exhaust, 4 bbl manifold, std exhaust manifold, that was extrusion haned. HEI driven MOPAR electronic dizzy 2910 pound 68 barracuda, 904 tranny, 3,23 rearend Advice please 
|
|
| Author: | 70valiant [ Fri Sep 14, 2007 1:32 pm ] |
| Post subject: | |
I am running 57 jets in mine right now, a 10.5 power valve, blue cam on position "2", and I think it has the yellow spring in it now. |
|
| Author: | 68barracuda [ Fri Sep 14, 2007 2:22 pm ] |
| Post subject: | |
57 all round? 53 prim 51 sec silver spring, pink/orange in hole 1 Fanie |
|
| Author: | 70valiant [ Fri Sep 14, 2007 6:01 pm ] |
| Post subject: | |
57 primaries secondary plate still no jets in the secondaries. |
|
| Author: | 68barracuda [ Fri Sep 14, 2007 9:34 pm ] |
| Post subject: | |
Any ideas on what the metering plates equivalent jetting would be? Fanie |
|
| Author: | 70valiant [ Sat Sep 15, 2007 6:03 am ] |
| Post subject: | |
I have no clue what the metering plate equivalent would be sorry |
|
| Author: | 68barracuda [ Sat Sep 15, 2007 10:52 am ] |
| Post subject: | |
http://www.holley.com/types/Metering%20Plates.asp OK so now I have the metering plate jetsizes anyone with a normal jet metering plate comparison 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|