8 3/4 center section 2.76 ratio open drive Casting number 2881489
Anyone know what this might be worth?

http://www.renaissanceracing.com/Albums ... r8-34.html
http://www.renaissanceracing.com/Albums ... -2-76.html

_________________
67Cuda,FAST EZEFI,340cu,CR=10.25,RollerCam&Rocker (XR268HR,#20-810-9)(#1622-16)(EddyRPM#60779,#7576), (MSD6AL,#6425) A904, GearVendorsOD, 8 1/4,3.55:1, ClassicAir

$40 to $60.00 range in my book... a little more if it has the large yoke on it.
DD

IIRC, Randy's Ring 'n' Pinion was looking for core cases a few years back. Would give $75+ship for an empty case, maybe just 489?

Lou

_________________
Home of Slant6-powered fun machines since 1988

Lou gave me one a few years ago.

I have since lost it in my shop somewhere.

_________________
Official Cookie and Mater Tormentor.

Yep, but boy did it turn into a fiasco for a buddy and I. He needed to supply a core for the 4.10 setup he was buying, and was told about this "deal". We both came up with a couple and lugged them across the state when we were going to a car show in Seattle. Drove up there first, and all of a sudden, they weren't really looking for cores and paying $75. In the end, we did get $60 each, but it took some arguing and about 3 hours to get them to do anything.

Not sure what the problem was, but it was spun as a mis-communication between the salesman that talked to my friend, and the salesman's supervisor.

Nothing against Randy's, but it sure wasn't what we expected.

_________________
'15 Chrysler 200S V6
'74 Duster 360, factory 4 speed car