Here's a pic with dimensions.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Hitch Plans needed https://slantsix.org/forum/viewtopic.php?t=26532 |
Page 1 of 1 |
| Author: | 68barracuda [ Sat Jan 05, 2008 7:25 am ] |
| Post subject: | Hitch Plans needed |
Hi guys - I urgently need a set of plans for a tow hitch for a 68 Fastbody Barracuda Regards Fanie Gerber |
|
| Author: | Davids63Dart [ Sat Jan 05, 2008 9:19 am ] |
| Post subject: | |
I have an old hitch from my 63 Dart. I could give you some dimensions if they're the same. |
|
| Author: | 68barracuda [ Sat Jan 05, 2008 10:00 am ] |
| Post subject: | |
Thank you Dave A pic or two will also be appreciated if possible - it will give me somewhere to start Fanie |
|
| Author: | Joshie225 [ Sat Jan 05, 2008 1:48 pm ] |
| Post subject: | |
Lots of cars and trucks have the same rear frame width as an A-body. I put a receiver hitch on my wife's '72 Duster back in '95. I had a shop weld it right to the subframe. The hole for the ball mount had to be moved from below the cross tube to behind it, but that's it. If you're on a budget I would measure the subframe width and go hit a wrecking yard and see what matches up. |
|
| Author: | Davids63Dart [ Sat Jan 05, 2008 5:16 pm ] |
| Post subject: | |
Here's a pic with dimensions.
|
|
| Author: | sandy in BC [ Sat Jan 05, 2008 5:28 pm ] |
| Post subject: | |
Nice photo work! |
|
| Author: | 68barracuda [ Sat Jan 05, 2008 10:49 pm ] |
| Post subject: | |
Thanx The big issue is that down here in South Africa the there is not many of these guys around anymore on the roads or in wrecking yards |
|
| Author: | Joshie225 [ Sat Jan 05, 2008 11:11 pm ] |
| Post subject: | |
True, but since there are many pickup trucks that have the same width frame rails they can donate a receiver hitch. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|