Will the front end parts from a 1980 aspen wagon go into a 1970 Dart? UCA, Spindles, etc? I need to convert my front end to BBP so I don't need to carry two spares. Will it work?

Thanks in advance,

Nat

_________________
1970 four-door Dart, 225/A-904/2.45 gears. 0-60 in twenty three minutes!

The spindles with the calipers and brackets are all that you can use from the Aspen. You'll still need large ball joint A-body upper control arms, new lower ball joints, brake hoses and a master cylinder at a minimum.

You're welcome.

Joshua

_________________
Joshua

D'oh.

Thanks.

_________________
1970 four-door Dart, 225/A-904/2.45 gears. 0-60 in twenty three minutes!