: I've noticed that on hard stops my oil pressure
: drops to 0 psi then returns to 40-50 lbs. I
: assume this is caused by oil puhing up in
: the pan and returning....Is this normal on a
: 65 - 225 ?
: I figured when I overhaul my Engine soon..I
: would build some baffles along with a
: windage screen. Any other Ideas?

: I would weld a couple of baffels into the pan
: and be sure the oil pick-up tube is correct
: for that year oil pan and positioned close
: to the pan's floor.
:
: Tip: When doing pan baffels and windage trays,
: always check all clearances, including the
: dip stick's clearance.
: DD

: I'll guess that last bit's a wee reference to
: my recent snafu... very polite.
: Lou