Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Wed Nov 20, 2024 1:35 am

Unanswered topics | Active topics


» » Tech Q & A » Engine

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
rdcamit
 Post subject: 340 Springs
PostPosted: Wed Jan 21, 2009 3:52 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Fri Dec 19, 2008 10:10 am
Posts: 24
Location: Biloxi MS
Car Model:
I have a question I would like to get answered. I see that a lot of people are using the 340 springs in the /6 heads with the bigger valves the question I have is are you running the double spring setup or a single spring setup? the 340's I ran used a double spring set up so just trying to figure out what I need for my /6.
Thanks
Top
   
Reply with quote  
Doc
 Post subject:
PostPosted: Wed Jan 21, 2009 4:30 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
The factory 340 spring is really a single spring with an inner "flat wire" damping coil... it looks like a double spring but it's not.
DD
Top
   
Reply with quote  
rdcamit
 Post subject: 340 Springs
PostPosted: Wed Jan 21, 2009 4:47 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Fri Dec 19, 2008 10:10 am
Posts: 24
Location: Biloxi MS
Car Model:
The reason I ask is that I found a set of 340 springs on ebay for 38.00 and asked the same qustion and the seller told me they were a single spring and I know that I had a double setup so what is everyone running springs with or without the coils.
Thanks
Top
   
Reply with quote  
slantzilla
 Post subject:
PostPosted: Wed Jan 21, 2009 6:30 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14479
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
I used stock 340 springs w/o the damper. :shock:

_________________
Official Cookie and Mater Tormentor.
Top
   
Reply with quote  
rdcamit
 Post subject: 340 springs
PostPosted: Wed Jan 21, 2009 6:33 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Fri Dec 19, 2008 10:10 am
Posts: 24
Location: Biloxi MS
Car Model:
Is $38.00 a good price for a set of 12 new springs
Top
   
Reply with quote  
Aggressive Ted
 Post subject:
PostPosted: Wed Jan 21, 2009 6:38 pm 
Offline
Supercharged
User avatar

Joined: Mon Jan 15, 2007 5:05 pm
Posts: 3767
Location: Black Diamond, WA
Car Model:
I am running my 340 springs with out the damper also.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG
Top
   
Reply with quote  
Joshie225
 Post subject:
PostPosted: Wed Jan 21, 2009 7:01 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
Quote:
I am running my 340 springs with out the damper also.
Why? The damper is there to reduce spring surge.

_________________
Joshua
Top
   
Reply with quote  
stonethk
 Post subject:
PostPosted: Wed Jan 21, 2009 8:18 pm 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2008 8:28 pm
Posts: 645
Location: SFCAUSA
Car Model:
Do you need to take metal off the spring seat area in order to use the damper?

_________________
<img src="http://farm4.static.flickr.com/3173/2992308402_5481afb26e_t.jpg">
Top
   
Reply with quote  
Joshie225
 Post subject:
PostPosted: Wed Jan 21, 2009 8:25 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
The 340 spring drops right in no machining required. I do use larger retainers though. We've been over the retainer issue before. I even posted pictures.

_________________
Joshua
Top
   
Reply with quote  
rdcamit
 Post subject:
PostPosted: Wed Jan 21, 2009 8:55 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Fri Dec 19, 2008 10:10 am
Posts: 24
Location: Biloxi MS
Car Model:
do you happen to know or have a good part number for the retainers and if I understand you correctly I should be looking for springs with the dampners installed
Top
   
Reply with quote  
Joshie225
 Post subject:
PostPosted: Wed Jan 21, 2009 9:27 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
The Comp Cams retainer in a set of 12 is 744-12 or a set of 16 as 744-16. The 340 type springs are 901-16. It's more expensive to buy 12 individual 901 springs than the set of 16. I wish Comp had the 901 spring in a set of 12, but it doesn't appear that they have anything other than individual springs or sets of 16.

_________________
Joshua
Top
   
Reply with quote  
rdcamit
 Post subject:
PostPosted: Wed Jan 21, 2009 10:58 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Fri Dec 19, 2008 10:10 am
Posts: 24
Location: Biloxi MS
Car Model:
Thanks Joshie for all the info
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 12 posts ] 

» » Tech Q & A » Engine

All times are UTC-08:00

Who is online

Users browsing this forum: Google [Bot] and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited