aaaaaaaaaaaaaaaah!!!!

Can't seem to find that anywhere and I really need it to put my rusty bucket back on the road!

Where the hell does each cooler line go? Back of the trans to which one on the rad? Front of the trans...?
Everything's stock...

Thanks for the help!

Marc

There are two fittings on the driver's side of the transmission. There are two similar fittings at the bottom of the radiator, facing rearward. These are where the lines connect. If your radiator hasn't got any such fittings, it is from a car with a manual transmission, and you will either need an auto-trans radiator or an external fluid cooler. See also this thread.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Hi Dan,

Yes my rad has the two fittings, my question was about if there was a way of connecting them (e.g : the right one with the most rear one etc etc...)

No, either way is okeh.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Just a FYI. The front fitting on the trans is the pressure output to the cooler. The rear fitting on the trans is the return from the cooler.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225