| Slant Six Forum https://slantsix.org/forum/ |
|
| Full synchro 3spd for my 1960? https://slantsix.org/forum/viewtopic.php?t=35516 |
Page 1 of 1 |
| Author: | Michael [ Mon May 25, 2009 9:01 am ] |
| Post subject: | Full synchro 3spd for my 1960? |
I have a floor shifted 1960 Valiant project and I'd like to swap in the a-230 full synchro 3 speed box. I have done alot of seaching in the archives but haven't found definitive answers to a few questions. 1. Will the 230 bolt up to my bell housing (see pic)? http://i253.photobucket.com/albums/hh71 ... G_1469.jpg 2. Will my stock linkage adjust enough to shift properly? 3. How do I positively i.d. the 230? (i.e. casting numbers.) I have the correct driveline from a 66 Val sitting around so this swap would be kinda nice! Thanks for any advice. Cheers - Mike |
|
| Author: | Doc [ Tue May 26, 2009 11:03 am ] |
| Post subject: | |
Yes, the bell housing BP is the same Linkage will need some "re-arranging" but do not let that stop you. You will need a 1966 A-Body speedo cable. I have a couple of used 230s so send me a PM if you need one. DD |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
