| Slant Six Forum https://slantsix.org/forum/ |
|
| Mini Starter Wiring Diagram https://slantsix.org/forum/viewtopic.php?t=3621 |
Page 1 of 1 |
| Author: | Tom Gilsdorf [ Wed May 15, 2002 5:19 pm ] |
| Post subject: | Mini Starter Wiring Diagram |
Just picked up a new mini starter PN 53005984. Converting from an old 1960 starter w/ external solenoid. Anyone have a wiring diagram for this thing? Thanks in advance. Gilly tlg225ccr@aol.com |
|
| Author: | Doctor Dodge (Doug Dutra) [ Thu May 16, 2002 7:33 pm ] |
| Post subject: | Re: Mini Starter interchange problems |
I would double check the tooth count on the 1960 flywheel, I have info that says the direct drive starter "early" flywheel has more starter teeth, this may cause starter engagement problems with the mini starter. I show the correct tooth count as 122 so count the teeth on yours. This is a conversion I have never performed so I am interested in what you find. DD |
|
| Author: | Tom Gilsdorf [ Fri May 17, 2002 5:15 am ] |
| Post subject: | Re: Mini Starter interchange problems |
Quote:
: I show the correct tooth count : as 122 so count the teeth on yours. : This is a conversion I have never performed so : I am interested in what you find. : DD Eleventy-Seven, Eleventy-Nine. Dang, Doc! I had to take my shoes off to count this one! I'm cross-eyed now, but I got 122, twice. The parts aren't talkin, so this may not be a 1960 flywheel. BUT, I count 122 on mine. Thanks for the info. It would have been a very unpleasant suprise to crash the teeth on the flywheel. Later, Gilly tlg225ccr@aol.com |
|
| Author: | Doctor Dodge (Doug Dutra) [ Sat May 18, 2002 9:38 am ] |
| Post subject: | Re: Mini Starter interchange, A-OK |
Sorry to put you through that Gilly but as you said, doing the count is easier than changing a chewed-up flywheel. I have a 1960 flywheel for the direct drive starter in my shed, I will have to pull it out and count the teeth. This is good info to add into the clutch / flywheel article, I've seen this issue cause people problems. As for the wiring, I would say you want the 62 & later starter relay and then the ministarter wires the same as all the other gear reduction MoPar starter systems. DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|