Slant Six Forum
https://slantsix.org/forum/

???? about 1978 Plymonth slant six
https://slantsix.org/forum/viewtopic.php?t=37482		 Page 1 of 1
Author:  flipfloppop [ Mon Oct 12, 2009 5:05 pm ]
Post subject:  ???? about 1978 Plymonth slant six
Hello just joined I have a 1951 International pickup and I'm thinking about putting a 1978 Plymonth slant six in it. Did the slant six come with a ( brain/computer ) in it or not. :?: :?:

Thanks for the help,
flipfloppop
Author:  Reed [ Mon Oct 12, 2009 5:16 pm ]
Post subject: 
Hello and welcome. Sounds like a fun project. Most late 70s slant six vehicles did not have a computer controlled ignition or carburetor, but some did. The good news is that it is actually quite simple to remove the computer controlled carburetor and ignition system and swap then to something else.

Try searching for "lean burn" and "hei swap".
Author:  flipfloppop [ Mon Oct 12, 2009 5:31 pm ]
Post subject:  ???? about 1978 Plymonth slant six
Thanks a lot REED for the answer thats what I needed to know.

Thanks for the help,
flipfloppop
Author:  Wesola78 [ Mon Oct 12, 2009 9:33 pm ]
Post subject: 
'51 International, cool! 8)
I have a 1978 Plymouth Volare with a slant six. Mine has electronic ignition, but no computer. Like Reed said, most did not have one. If yours does, it's easy to get rid of.
Post some pics of your ride if you can!
Welcome to the site.
Author:  flipfloppop [ Tue Oct 13, 2009 6:19 pm ]
Post subject: 
I hope this work.

http://viewmorepics.myspace.com/index.c ... mId=640113

If not I will try later.

flipfloppop
Author:  Reed [ Tue Oct 13, 2009 6:51 pm ]
Post subject: 
Cool! Looking good! :D
Author:  Wesola78 [ Tue Oct 13, 2009 9:55 pm ]
Post subject: 
Way cool! 8) 8) 8)
Author:  flipfloppop [ Wed Oct 14, 2009 2:59 pm ]
Post subject: 
Thanks alot going to get the 78 Plymouth slant super six tonight.More work ahead. :D :D

flipfloppop
Author:  Wesola78 [ Wed Oct 14, 2009 5:36 pm ]
Post subject: 
Keep us updated, and have fun! 8)
Author:  flipfloppop [ Sun Oct 18, 2009 2:45 pm ]
Post subject: 
Go here: http://viewmorepics.myspace.com/index.c ... mID=640113 and go page ( 3 ) last photo. Hope sameone can help with this

flipfloppop
Author:  Fopar [ Sun Oct 18, 2009 7:19 pm ]
Post subject: 
The thing that bolts under the carb is the EGR. Just build a plate to cover and use the EGR gasket to seal it.
Author:  flipfloppop [ Mon Oct 19, 2009 3:55 pm ]
Post subject: 
Thanks: Fopar for the help on this. But I do'nt what to sound too stupid but what is the EGR. I'm old school point and plugs and it runs. I'm not up on all of this new (1960-2009 ) stuff. Any help. :? :?
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/