Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 26, 2024 12:27 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Check that fan!!!
PostPosted: Sun Jan 10, 2010 7:40 am 
Offline
EFI Slant 6

Joined: Mon Feb 20, 2006 7:19 am
Posts: 470
Location: SC
Car Model: 63 Dart 81 D150
A few months ago I had a stock 4 blade fan explode on me, wiped out the hood and the battery. I was only turning about 3800rpm when it let go. Earlier that morning I had been doing some tuning, and was reving the engine from under the hood, a few more revs and it could have gotten me then.

The hood where it escaped
Image

Inside the hood
Image

The fan
Image
Image

BTW The fan looked ok when installed, and never gave any indication of a problem, well until it came out the hood. No more fixed factory fans for me, it will get an electric fan in the future.

Stay safe around those fixed fans!

TopHat


Last edited by tophat on Wed Feb 07, 2018 4:36 pm, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Sun Jan 10, 2010 7:55 am 
Offline
Turbo EFI
User avatar

Joined: Mon Nov 04, 2002 9:07 am
Posts: 1129
Location: Cypress, Texas, Northwest Houston. The Lone Star State
Car Model:
Whoa! :shock:
I'm glad that nobody got hurt, obviously that could have caused some serious injury.
I have also been thinking about installing an electric fan on my slant, and this is one more point for an electric fan.
I'm glad that it wasn't any worse...

_________________
"Ja, Ich fahre ein altes auto."
'78 Volare 225
'67 Charger 318


Top
   
 Post subject:
PostPosted: Sun Jan 10, 2010 8:09 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Mar 02, 2008 8:18 am
Posts: 257
Car Model:
Wow! :shock:

_________________
Image


Top
   
 Post subject:
PostPosted: Sun Jan 10, 2010 8:16 am 
Offline
3 Deuce Weber

Joined: Sat Nov 07, 2009 5:54 pm
Posts: 71
Location: Washington State
Car Model:
Holy crap!!!! Ive seen flex fans come apart but never a factory fan. Really glad no one got hurt.


Top
   
 Post subject:
PostPosted: Sun Jan 10, 2010 8:20 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Yumpin' yiminy. That's right up there in nightmare territory with "rotary lawnmower engine turning at 3600 rpm, blade tip speed twenty thousand feet per second, blade flies apart and pieces come through the mower deck". I've never before heard of a stock rigid steel fan blade grenading like this, either. Excellent reminder never to stand in the same plane as a spinning engine fan.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sun Jan 10, 2010 9:58 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14487
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Quote:
Holy crap!!!! Ive seen flex fans come apart but never a factory fan. Really glad no one got hurt.
Me too. I saw one of the old fiberglass blade flex fans come apart on a 427 Ford at 6000+ rpm. It stuck a blade in the ceiling of the shop they were working in. :shock:

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Sun Jan 10, 2010 3:53 pm 
Offline
Turbo EFI
User avatar

Joined: Mon Jul 14, 2003 10:02 am
Posts: 1817
Location: Southeastern Pennsylvania
Car Model:
I had an electric fan loose 3 blades going down the track 2 years ago in Pittsburgh. The stupid thing came on at about 3/4 track :shock:
of course the blades are much smaller, lighter and plastic. They did no damage under the hood though.

_________________
ImageImage


Top
   
 Post subject:
PostPosted: Wed Jan 13, 2010 9:31 pm 
Offline
TBI Slant 6

Joined: Tue Oct 25, 2005 11:31 am
Posts: 189
Location: Addison Illinois
Car Model:
I had this happen to me on a 6 blade fan on my 1975 Valiant. Extremly cold day, car was at the train station all day, hopped in, started her up and let her warm for a minute before taking off for home. WA -BAM !! I get out and look under the hood and couldn't see anything but the engine was shaking quite a bit. So I head home and was looking round the engine compartment and couldn't figure out what was wrong. (the radiator had a shroud on it and the broken blad was down at 6 o' clock position). I looked under the hood for an hour, when my mom walks by and says "Whats that thing sticking out under the battery tray ?" There was the fan blade under the battery tray and it had pucntured partially thru the inner fenderwell sheetmetal where it was lodged. Took 15 minutes to get that booger out... Be Careful Guys !!


Top
   
 Post subject:
PostPosted: Wed Jan 13, 2010 10:19 pm 
Offline
Board Sponsor
User avatar

Joined: Mon Oct 28, 2002 2:42 pm
Posts: 694
Location: Santa Cruz, CA
Car Model:
I saw one go through the hood of a '49 Chevy pickup and they used some HEAVY gauge sheet metal back then.

Mind those stress risers, boys...

_________________
obliquely-inclined state of mind


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Semrush [Bot] and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited