Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 19, 2026 10:05 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu May 13, 2010 5:41 pm 
Offline
3 Deuce Weber

Joined: Sun Jun 07, 2009 2:20 pm
Posts: 54
Location: McKinney, TX
Car Model:
Does anyone know how to remove the place covering the speedometer gear? I took the fork like holder off, but the plate did not come off. I didn't want to pry it and damage it. Anyone have any experience with this issue? Thanks in advance for the help.


Top
   
 Post subject:
PostPosted: Thu May 13, 2010 6:03 pm 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5623
Location: Downeast Maine
Car Model:
Assuming you have an automatic…
After removing the fork, the assembly containing the gear should pull straight out. All that is holding it is an “Oâ€￾ ring, and a bunch of crud.

Before you pull out the gear & cover or plug, give it a good cleaning than examine it for three sets of numbers, say, but not necessarily; (20-26), (27-34), (35-39) located ninety degrees from each other and how the fork relates to these.

The numbers indicate the tooth count of your gear. Low tooth count = smaller diameter gear, large tooth count = larger diameter gear. That cover that holds the gear, and the speedometer cable is an eccentric, so as that cover is rotated through 270 degrees it will adjust the placement of the different size gears that run off of an internal gear in the transmission.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
 Post subject:
PostPosted: Thu May 13, 2010 6:35 pm 
Offline
6 Pack Dart
User avatar

Joined: Sat Nov 02, 2002 5:44 pm
Posts: 2281
Location: Eugene, Oregon
Car Model:
There is a small raised indicater on the transmission clean off around the area and you will see it.

_________________
Part of Tyrde-Browne Racing


Top
   
 Post subject:
PostPosted: Sat May 15, 2010 4:42 pm 
Offline
3 Deuce Weber

Joined: Sun Jun 07, 2009 2:20 pm
Posts: 54
Location: McKinney, TX
Car Model:
Thanks for the help guys


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited