| Slant Six Forum https://slantsix.org/forum/ |
|
| cam end play and button https://slantsix.org/forum/viewtopic.php?t=4078 |
Page 1 of 1 |
| Author: | 69dart [ Sat Aug 24, 2002 12:56 pm ] |
| Post subject: | cam end play and button |
I have read a couple of articles regarding the setting of the end play and the numbers were from .010 to .050. I was wondering what the "ideal" value might be. I am currently at .005 and wondering how much more room to give it. thinking of .010 for a final value. Thanks Steve I had a neat button I built from an old allen wrench that worked out real nice. The cam bolt I changed out to a cap screw, I think thats what they are called, and then ground a nice round end on an old allen wrench and cut to length. It is very easy to build and make adjustments for fine tunning. I planned on using a little loc-tite on the bolt for the final assembly. If I can get the camera working I will post pictures, with chucks help. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|