| Slant Six Forum https://slantsix.org/forum/ |
|
| aluminum radiator https://slantsix.org/forum/viewtopic.php?t=43063 |
Page 1 of 1 |
| Author: | dartfordoor [ Thu Dec 30, 2010 6:54 pm ] |
| Post subject: | aluminum radiator |
I need to replace my old radiator on my 73 dart /6, was considering an aluminum radiator cheapy from Summit. I know the cheapy has no trans cooler or mounting brackets. didn't really see any mount kits, I guess people would weld an aluminum angle on the side and bolt the radiator to the support. I believe it needs to be tig welded, something I don't have. So does anyone have any suggestion, or should I get an oem made in china replacement? Also on the radiator which is the inlet lower passenger side or upper driver side. thanks in advance... Jerry |
|
| Author: | 4speed [ Thu Dec 30, 2010 7:12 pm ] |
| Post subject: | |
Upper is in. |
|
| Author: | Aggressive Ted [ Thu Dec 30, 2010 7:14 pm ] |
| Post subject: | |
I got a stock Modine with all the fittings for my 74 out of Oregon from our local Auto Parts store in here in Black Diamond. |
|
| Author: | raPoM [ Thu Dec 30, 2010 7:29 pm ] |
| Post subject: | |
Go to a junk yard and get a rad out of a BMW. Fits the stock rad support like it was made to go there. Just need to secure it at the top.LIGHT weight aluminum core with plastic tanks. |
|
| Author: | 4speed [ Thu Dec 30, 2010 7:36 pm ] |
| Post subject: | |
What year/model/engine BMW? |
|
| Author: | raPoM [ Thu Dec 30, 2010 8:12 pm ] |
| Post subject: | |
I know nothing about BMW's other than they are all over the junkyards here. I would say it was a 7 series? With a 6??? I know the ones with 4 cyl. use smaller rads,that fit in early A's quite well.Look for one with a 6 in it and you should be set(for 67+ a body) |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|