| Slant Six Forum https://slantsix.org/forum/ |
|
| steering wheel alignment https://slantsix.org/forum/viewtopic.php?t=45159 |
Page 1 of 1 |
| Author: | 64conv65hard [ Mon May 30, 2011 4:34 pm ] |
| Post subject: | steering wheel alignment |
Pull ed the engine in my 64 barracuda (273 sorry) and i had to remove the steering column to get the manifold off. since it's out i figured this would be a good time to "straighten" the steering wheel (it's off by about 1/3 of a turn). since the steering wheel is splined (and keyed) and can only go on one way, and the column is also splined (and keyed) and only goes on the box one way. where do i make the correction? |
|
| Author: | Joshie225 [ Mon May 30, 2011 4:52 pm ] |
| Post subject: | |
Tie rods. |
|
| Author: | SlantSixDan [ Mon May 30, 2011 5:11 pm ] |
| Post subject: | Re: steering wheel alignment |
Quote: the steering wheel is splined
True.Quote: and can only go on one way
False.Quote: the column is also splined
True.Quote: and only goes on the box one way
False.Never underestimate the power of an IPO to hamfist something together the wrong way round. Two-filament brake/tail or park/turn bulbs can also "only be installed one way", and yet…! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|