Slant Six Forum
https://slantsix.org/forum/

Car dies when I turn on the headlights
https://slantsix.org/forum/viewtopic.php?t=46488
Page 1 of 1

Author:  Nongan [ Wed Sep 28, 2011 10:49 pm ]
Post subject:  Car dies when I turn on the headlights

Ok, so I have suddenly gotten the problem of when my car is running and I turn the headlights on it pops one of the 20amp fuses and the car dies on the spot. Any responses would be nice. Am I looking at a voltage regulator? I have class tomorrow in the afternoon and i have to drive to Salem.

Thanks in advance,
Seth

Author:  SlantSixDan [ Wed Sep 28, 2011 11:01 pm ]
Post subject: 

No, it's not the voltage regulator. Sounds like you have got a big, serious short circuit in your wiring. I sincerely wish you good luck in finding and fixing it.

Author:  Nongan [ Wed Sep 28, 2011 11:47 pm ]
Post subject: 

ok, fun stuff :( I noticed that my amp meter was sparking a little last night, can I bypass the gauge all together, and if so how so? I already know that the needle is in the center all the time. A lot of my electrical problems have been due to the amp meter one way or another and I'm kinda tired of it.

Author:  wjajr [ Thu Sep 29, 2011 5:44 am ]
Post subject: 

First investigate if the connections to amp gage can be made fast, or rather tight; double nutting may be necessary. If not able to repair, pull off both leads from amp gage, and tightly nut & bolt them together. Than tape that connection up real good so it dose not ground out on anything.

Author:  Nongan [ Thu Sep 29, 2011 12:12 pm ]
Post subject: 

Ok, the problem is specific to the headlights, park lights work fine, but when its running and I put the headlights on all the way I am popping 30 amp fuses. What should I check? Headlight switch? Dimmer switch? Oh and when I would press the dimmer switch sometimes the low beams wouldn't come back on, just trying to tell you guys everything that is wrong.

Author:  Nongan [ Thu Sep 29, 2011 1:24 pm ]
Post subject: 

Nevermind I found it. One of my headlight switch wires had rubbed partially and was touching metal. Thanks for the help guys

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/