http://www.amazon.com/Rancho-RS8132-Spr ... sbs_auto_3
| Slant Six Forum https://slantsix.org/forum/ |
|
| Adding a leaf, new spring clamp? https://slantsix.org/forum/viewtopic.php?t=47917 |
Page 1 of 1 |
| Author: | Reed [ Wed Feb 15, 2012 9:54 am ] |
| Post subject: | Adding a leaf, new spring clamp? |
I will be adding a leaf to the factory four leaf rear springs in my brother's Duster. The "new" leafs will be coming out of the spring packs I took off my brother's 83 Dodge van. The van leafs are the same width as the Duster leafs, so I should be able to unbolt the Duster packs, slide in the van leaf, and install a new grade 8 bolt to hold the spring packs together. My concern is the little metal strap that goes around the ends of the spring packs. Adding a leaf will make the metal strap too short to be reused. Can I just leave it off? Is there a source for a new strap the right length? Any input is appreciated. |
|
| Author: | Danarchy [ Wed Feb 15, 2012 10:26 am ] |
| Post subject: | |
I bought some a few years back for a Nova I had. I believe they were Rancho Brand for Jeeps and Trucks. |
|
| Author: | Danarchy [ Wed Feb 15, 2012 10:30 am ] |
| Post subject: | |
http://www.amazon.com/Rancho-RS8132-Spr ... sbs_auto_3
|
|
| Author: | Reed [ Wed Feb 15, 2012 10:39 am ] |
| Post subject: | |
Cool, thanks. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|