| Slant Six Forum https://slantsix.org/forum/ |
|
| Transmission mount https://slantsix.org/forum/viewtopic.php?t=49537 |
Page 1 of 1 |
| Author: | Dltarnnr [ Sat Aug 11, 2012 11:20 am ] |
| Post subject: | Transmission mount |
I have a 63 Dodge Polara with a 225 and a 727 trans.Ordered one thru Napa and it was wrong. I dont know if the people before me modified or what. The plate which mounts to trans the 2 bolt holes are 4" apart then it drops down getting sandwiched into the rubber and 2 studs that are 1" 1/8th apart which attaches to the bracket that bolts to frame.The bracket gets attached to frame with 4 bolts 3/4" . Is there somewhere I could go to cross reference it ? |
|
| Author: | SlantSixDan [ Sat Aug 11, 2012 11:33 am ] |
| Post subject: | |
Your transmission is almost certainly a 904, not a 727. Mount you need is here in "never have to replace it again" polyurethane. Part number PMEB. |
|
| Author: | Dltarnnr [ Sun Aug 12, 2012 7:58 am ] |
| Post subject: | |
Once again your info is like gold Thanks Dan |
|
| Author: | SlantSixDan [ Sun Aug 12, 2012 12:54 pm ] |
| Post subject: | |
Glad to help out! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|