Slant Six Forum
https://slantsix.org/forum/

Tire/Wheel thoughts
https://slantsix.org/forum/viewtopic.php?t=50935
Page 1 of 1

Author:  carrigan #3 [ Sat Jan 26, 2013 2:14 pm ]
Post subject:  Tire/Wheel thoughts

I'm doing a disc swap and front end rebuild, which swaps me to BBP and requires new rims and tires. Here's what I'm looking at:

225/60R15 on 15x7 rims

Here's my question:

What kind of backspacing might this require ('71 Dart Swinger with '74 disc parts up front, 7.25 with 10" drums out back)? And with that said, what length studs should I look at installing (the current studs extend 1" beyond the drum/rotor hub)?

Thanks for the help!

Author:  DusterIdiot [ Sat Jan 26, 2013 9:18 pm ]
Post subject:  Yep...

Stock studs should be fine if the backspacing is stock and no adaptors were used.

Backspacing is about 4.25" to 4.5" depending on style of rim and application/rim width.

-D.Idiot

Author:  carrigan #3 [ Sun Jan 27, 2013 7:43 am ]
Post subject: 

Thanks D.I.

I'll test fit everything with stock studs and go from there.

Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/