| Slant Six Forum https://slantsix.org/forum/ |
|
| MS2 timing offset variable? https://slantsix.org/forum/viewtopic.php?t=55477 |
Page 1 of 1 |
| Author: | pishta [ Fri May 30, 2014 8:50 pm ] |
| Post subject: | MS2 timing offset variable? |
My sensor is about 2 off TDC, is there an offset you can plug into MS to compensate for a stationary sensor (that should have been adjustable but I thought I nailed it) ? I thought I saw something like that in there. Sort of a global timing offset? |
|
| Author: | Pierre [ Fri May 30, 2014 9:19 pm ] |
| Post subject: | |
Yes - using EDIS there is at least. Called Trigger Offset or Advance Offset. Which tuning software are you using? In Tuner Studio its under tools > Trigger Wizard. http://www.diyautotune.com/tech_article ... how_to.htm |
|
| Author: | pishta [ Sat May 31, 2014 10:45 am ] |
| Post subject: | |
sweet! whats the max value? I know EDIS only does 10 degrees limp home but this allows a few mm wiggle room on mounting a VR pickup or adjusting a slipping trigger wheel. |
|
| Author: | Matt Cramer [ Mon Jun 02, 2014 9:57 am ] |
| Post subject: | |
If it's within 5 degrees, I wouldn't worry about it too much. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|