| Slant Six Forum https://slantsix.org/forum/ |
|
| Have any of you used These? https://slantsix.org/forum/viewtopic.php?t=56856 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Sat Jan 03, 2015 7:30 pm ] |
| Post subject: | Have any of you used These? |
http://store.specprod.com/productdetail/M50/1/1/94460 If so whaddya Think of them? Greg |
|
| Author: | nm9stheham [ Sun Jan 04, 2015 5:07 am ] |
| Post subject: | |
Cannot say that I would be confident to have those 3 3/8" bolts in shear mode AND the small matching clevise ends between me and suspension failure..... especially the small clevis behind the ball joint. I raced in rally for years, and would not feel comfortable with that on the street; it would be a guranteed failure point in rallying. (Seen it before in a Miata that had similar parts....) Perhaps, if you did not ever drive on rough roads or pavement..... |
|
| Author: | slantzilla [ Sun Jan 04, 2015 8:28 am ] |
| Post subject: | |
At $500 a pair I am not sure they give much of an advantage over anyone else' a-arms. The amount of pieces in them scares me too. |
|
| Author: | Dan-o [ Sun Jan 04, 2015 10:10 am ] |
| Post subject: | |
Quote: Cannot say that I would be confident to have those 3 3/8" bolts in shear mode AND the small matching clevise ends between me and suspension failure..... especially the small clevis behind the ball joint. I raced in rally for years, and would not feel comfortable with that on the street; it would be a guranteed failure point in rallying. (Seen it before in a Miata that had similar parts....) Perhaps, if you did not ever drive on rough roads or pavement.....
I've seen the clevises fail on those types of arms before.
|
|
| Author: | Valleyant [ Sun Jan 04, 2015 10:53 am ] |
| Post subject: | hmmmm |
Looks like a lot of strung together spaghetti. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|