Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 30, 2024 2:30 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Jan 06, 2015 7:06 am 
Offline
EFI Slant 6
User avatar

Joined: Tue Aug 19, 2003 3:52 am
Posts: 275
Location: Helsinki Finland
Car Model: 1966 2D Dart
Image

I am installing a 22" wide Griffin for my slant. The upper hose was a pain with fuel rail hosing with original radiator. With Griffin I will need 3 pcs 90 angle hoses to build the upper hose.

If an alternative thermostat cover with outlet to the left will be available the hosing will become much better.

Has there been such covers?

If yes where I could get one?

_________________
1966 Dart. 170 cu.in. 200 rwhp.


Top
   
 Post subject:
PostPosted: Tue Jan 06, 2015 7:16 am 
Offline
EFI Slant 6

Joined: Wed Nov 07, 2007 9:34 am
Posts: 340
Location: Upstate NY
Car Model:
There is a straight cover available, I did the same thing anew years back. I don't remember what it was for but the guys at my local auto parts store pulled it off the shelf for me, common item. Also if you measure the lengthens and where the curves need to be you can find a hose that will work in one piece, again I got a hose for mine but don't remember what it fit. I do know it was off a truck and had at least one to many turns that I cut off to make a nice custom fit. For the bottom the stock hose worked, I had a friend relocate the connection on the radiator a little lower. Hope I am of some help.

_________________
Image
Grandpa's 1974 Dart Custom 4 door 225 auto, Aluminum Radiator, 1920 Holley.


Top
   
 Post subject:
PostPosted: Tue Jan 06, 2015 9:56 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14492
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Late 318 with the small thermostat should do the trick. :D

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Tue Jan 06, 2015 5:21 pm 
Offline
Turbo Slant 6

Joined: Tue Mar 16, 2004 6:25 am
Posts: 831
Location: Tompkinsville, KY
Car Model:
If you want cast aluminum and don't mind non-Mopar stuff, I once used a Ford Taurus 3.8 housing, like a Four Seasons #84999.
Probably fits more applications, should be boneyard friendly.

Just had to drill the holes oversize.

_________________
O==\=/==O

"A mechanic is Somebody."
- Jim Preston


Top
   
 Post subject:
PostPosted: Tue Jan 06, 2015 5:29 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 8673
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
I have the housing and the hose that works well listed in my Valiant build thread over in the Virtual drag strip section. Part #'s are there too. I will try and get you a link.

Rick

Here is the thread. If you have the 1 3/4" angled lower outlet it also shows what hose works for that as well. hope it helps.

http://slantsix.org/forum/viewtopic.php ... ose#383413

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
 Post subject:
PostPosted: Thu Jan 08, 2015 3:27 am 
Offline
EFI Slant 6
User avatar

Joined: Tue Aug 19, 2003 3:52 am
Posts: 275
Location: Helsinki Finland
Car Model: 1966 2D Dart
Thanks once again. I will check the part out from local US cars part store. If not available, then rockauto.com

_________________
1966 Dart. 170 cu.in. 200 rwhp.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Ahrefs [Bot], Semrush [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited