| Slant Six Forum https://slantsix.org/forum/ |
|
| Anyone seen one of these? Doc? https://slantsix.org/forum/viewtopic.php?t=57180 |
Page 1 of 1 |
| Author: | SlantSixDan [ Sat Feb 28, 2015 2:39 pm ] |
| Post subject: | Anyone seen one of these? Doc? |
H'mmm…now here's an oddball valve cover I've not seen before. Looks like a '70-up stamping, but with one front chimney (per '60-'69) and one rear hole (small for PCV valve grommet per '66-'69, not large for breather grommet per '70-up). The boss for the '70-up central PCV valve location is present, but there's no hole. I'm guessing it's a service replacement item supplied in later years by Chrysler for older applications.    
|
|
| Author: | SlantSteve [ Sat Feb 28, 2015 2:51 pm ] |
| Post subject: | |
I'm pretty sure it's for the alloy head models 
|
|
| Author: | Greg Ondayko [ Sat Feb 28, 2015 3:01 pm ] |
| Post subject: | |
I doubt there is a part number ? Could it be for a marine application or industrial application that had possibly less stringent Emissions? Greg |
|
| Author: | SlantSixDan [ Sat Feb 28, 2015 3:20 pm ] |
| Post subject: | |
'70-up industrial/marine enignes I've seen have all had the '70-up 3-hole valve cover. No part number. Aluminum head model: you might be on to something there! 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|