| Slant Six Forum https://slantsix.org/forum/ |
|
| Windshield Washer Nozzle Photo Request https://slantsix.org/forum/viewtopic.php?t=57318 |
Page 1 of 1 |
| Author: | slantvaliant [ Thu Mar 19, 2015 10:57 am ] |
| Post subject: | Windshield Washer Nozzle Photo Request |
What do the original windshield washer nozzles look like on a mid-60's A-Body? Would someone please post some photos? I'm particularly interested in the mounting hardware, how much is exposed, etc. If you have aftermarket nozzles, I'd like to see how those mount, as well. My '64 didn't come with a windshield washer system, so I'm adding one. The guts will be from a universal kit. I'm not trying to restore, but I'd like to see an original set for comparison before I mount the provided generic plastic/brass pieces. I hacked a system together a couple of decades ago, but it has since returned to the earth. I'd like this one to be better. |
|
| Author: | neilskiw [ Thu Mar 19, 2015 12:59 pm ] |
| Post subject: | |
<a href="http://s1341.photobucket.com/user/neilskiw1neilskiw/media/wash%202_zpsfw4etjlq.jpg.html" target="_blank"><img src="http://i1341.photobucket.com/albums/o745/neilskiw1neilskiw/wash%202_zpsfw4etjlq.jpg" border="0" alt=" photo wash 2_zpsfw4etjlq.jpg"/></a> <a href="http://s1341.photobucket.com/user/neilskiw1neilskiw/media/wash%203_zpsyhktpgjz.jpg.html" target="_blank"><img src="http://i1341.photobucket.com/albums/o745/neilskiw1neilskiw/wash%203_zpsyhktpgjz.jpg" border="0" alt=" photo wash 3_zpsyhktpgjz.jpg"/></a> From my '64 Valiant Convertible. |
|
| Author: | 65 dartman [ Thu Mar 19, 2015 5:22 pm ] |
| Post subject: | |
That's the same as on my 65(s) |
|
| Author: | neilskiw [ Fri Mar 20, 2015 7:10 am ] |
| Post subject: | Dimensions |
I should have put a scale in the pic. 2 1/2 "squirter x 2 1/8" feed x 1/8" diameter. 3/16" feed to the tee. |
|
| Author: | slantvaliant [ Sat Mar 21, 2015 10:22 pm ] |
| Post subject: | |
Thanks! The nozzles I have are different of course, but I'll make do. Just trying to keep the system practical and low-profile. |
|
| Author: | BUCKET 636 [ Sun Jun 07, 2015 11:01 pm ] |
| Post subject: | |
Does anyone have a source for replacement nozzles as pictured above ? Cheers, Greg |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|